I am trying to setup an asterisk box on a simple isdn line with a fritz card. The Capi4Linux drivers are installed and seem to work correct as I can connect to an ISP, have not tried it with ISDN4Linux yet as I read that CAPI has many advantages over i4l ... but I think I will do this next.
Next I have compiled zaptel, libpri (are these really needed for a fritz card?) and asterisk and finally did 'make samples' as these are my first expierience with asterisk and wanted to try the demo context. To get it work with CAPI i have then installed the chan_capi.so driver from junghanns.net ... here some output from the cli.
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
Feb 12 03:08:07 NOTICE[1024]: chan_capi.c:2338 mkif: ast_capi_pvt(43910906,43910906,demo,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0
Feb 12 03:08:07 NOTICE[1024]: chan_capi.c:2338 mkif: ast_capi_pvt(43910906,43910906,demo,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0
Feb 12 03:08:07 NOTICE[1024]: chan_capi.c:2694 load_module: this box has 1 capi controller(s)
-- listening on contr1 CIPmask = 0x1fff03ff
-- CAPI[contr1] supports DTMF
-- CAPI[contr1] supports supplementary services
> HOLD/RETRIEVE
> TERMINAL PORTABILITY
> ECT
> 3PTY
> CF
> CD
> MCID
> CCBS
> MWI
> CCNR
== Registered channel type 'CAPI' (Common ISDN API Driver (0.3.0) aLaw)
[res_musiconhold.so] => (Music On Hold Resource)
== Parsing '/etc/asterisk/musiconhold.conf': Found
== Registered application 'MusicOnHold'
== Registered application 'WaitMusicOnHold'
== Registered application 'SetMusicOnHold'
== Parsing '/etc/asterisk/enum.conf': Found
Asterisk Ready.
*CLI> -- started pbx on channel (callgroup=0)!
Feb 12 03:08:19 WARNING[4101]: pbx.c:1778 ast_pbx_run: Channel 'CAPI[contr1/43910906]/0' sent into invalid extension 's' in context 'default', but no invalid handler
-- CAPI Hangingup
Feb 12 03:08:33 WARNING[5125]: pbx.c:1778 ast_pbx_run: Channel 'CAPI[contr1/43910906]/1' sent into invalid extension 's' in context 'default', but no invalid handler
-- CAPI Hangingup
-- started pbx on channel (callgroup=0)!
Feb 12 03:08:47 WARNING[6149]: pbx.c:1778 ast_pbx_run: Channel 'CAPI[contr1/43910906]/2' sent into invalid extension 's' in context 'default', but no invalid handler
-- CAPI Hangingup
-- started pbx on channel (callgroup=0)!
Feb 12 03:08:48 ERROR[3076]: chan_capi.c:1196 pipe_frame: wrote -1 bytes instead of 40
Any solution ??
bye
bodo
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
