On 01/16/2012 04:48 AM, Louis Carreiro wrote:
I've been banging my head against the wall for a while (almost 18 hours today alone) with this one... I migrated our incomming T1's from the Option 11 to our Asterisk box this morning. We have 1 local T1 and 2 long distance T1's. The local T1 went over with out a hitch. The problem is with my 2 long distance T1's. The switch on the other end is a DMS250 I'm told so I set Asterisk to DMS100 and got the timing, framing, etc all set. Well, the D channels came up so thats good. I started getting dropped calls every once in a while. I did a debug on the spans and saw the following:

Sounds similar to what I am doing. Migrating from a Nortel Option 61 to Asterisk. I have everything set, and am just waiting for an appropriate window to move the 4 T-1s (2 trunk groups). All PRIs are national though, not DMS100.
I tried configuring a trunkgroup and set the primary dch to 24 and the bdch to 72 and then then spanmap'ed span 2 and 3 into group 1 (e.g. 2,1,0 and 3,1,1) but I don't see anything when I do a "dahdi show channels" or a "pri show spans" or a "pri show channels", not even the channels not in the group. If I delete the trunkgroup, all three commands return all the channels. I'm just curious if I'm going down the right path with trunkgroups for this or if there is something else to take care of the DS1 Identifier issue.

Here are the relevant portions of my configs, I based them on a working model for PRIs connecting the Asterisk to the Option 61 as TIE trunks. This config has two dual port cards, with span 1 and 3 being a group and 2 and 4 being a different group. I hope this helps. (Or perhaps identifies something I have wrong that may not have been found yet ;-)

Dale

###################################
/etc/dahdi/system.conf
###################################

# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" B8ZS/ESF RED
span=1,1,0,esf,b8zs
# termtype: unknown
bchan=1-23
dchan=24
echocanceller=hwec,1-23

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" B8ZS/ESF RED
span=2,2,0,esf,b8zs
# termtype: unknown
bchan=25-47
dchan=48
echocanceller=hwec,25-47

# Span 3: TE2/1/1 "T2XXP (PCI) Card 1 Span 1" B8ZS/ESF RED
span=3,3,0,esf,b8zs
# termtype: unknown
bchan=49-71
dchan=72
echocanceller=hwec,49-71

# Span 4: TE2/1/2 "T2XXP (PCI) Card 1 Span 2" (MASTER) B8ZS/ESF RED
span=4,4,0,esf,b8zs
# termtype: unknown
bchan=73-95
dchan=96
echocanceller=hwec,73-95

##############################
/etc/asterisk/chan_dahdi.conf
##############################

[trunkgroups]
trunkgroup => 1,24,72
trunkgroup => 2,48,96
spanmap => 1,1,0
spanmap => 3,1,1
spanmap => 2,2,0
spanmap => 4,2,1

[channels]

....
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" B8ZS/ESF RED
; General Trunking
group=1
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 1-23

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" B8ZS/ESF
; IVR Trunking
group=2
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 25-47

; Span 3: TE2/1/1 "T2XXP (PCI) Card 1 Span 1" B8ZS/ESF
; General Trunking
group=1
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 49-71

; Span 4: TE2/1/2 "T2XXP (PCI) Card 1 Span 2" (MASTER) B8ZS/ESF RED
; IVR Trunking
group=2
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 73-95





--
"The truth speaks for itself. I'm just the messenger."
     Lyta Alexander - Babylon 5


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to