Which version do you recommend? Mine is 1.4.12. Att, Rafael Saraiva
2012/2/17 Danny Nicholas <[email protected]> > From what I read, your libpri may be out of date.**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rafael dos Santos > Saraiva > *Sent:* Friday, February 17, 2012 11:21 AM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users] Block Collect Calls on ISDN trunk**** > > ** ** > > The value is always -1. I must enable something in chan_dahdi to pass the > correct value?**** > > ** ** > > ++++++**** > > [PABX]**** > > exten=>_X.,1,Gotoif([${CHANNEL(reversecharge)} = -1] > ?entrada,${EXTEN},1:hangup,${EXTEN},1)**** > > +++++++++++++++++++**** > > ** ** > > rs0000sr305*CLI> -- Accepting call from '5132083300' to '1584' on > channel 0/18, span 1**** > > -- Accepting call from '5132083300' to '1584' on channel 0/18, span 1* > *** > > rs0000sr305*CLI> -- Executing [1584@PABX:1] > GotoIf("DAHDI/i1/5132083300-4", "[-1 = -1] ?entrada,1584,1:hangup,1584,1") > in new stack**** > > -- Goto (entrada,1584,1)**** > > -- Executing [1584@PABX:1] *GotoIf("DAHDI/i1/5132083300-4", "[-1 = > -1] ?entrada,1584,1:hangup,1584,1"*) in new stack**** > > -- Executing [1584@entrada:1] Answer("DAHDI/i1/5132083300-4", "") in > new stack**** > > -- Goto (entrada,1584,1)**** > > -- Executing [1584@entrada:1] Answer("DAHDI/i1/5132083300-4", "") in > new stack**** > > rs0000sr305*CLI> -- Executing [1584@entrada:2] > Dial("DAHDI/i1/5132083300-4", "SIP/1584,30,tT") in new stack**** > > -- Executing [1584@entrada:2] Dial("DAHDI/i1/5132083300-4", > "SIP/1584,30,tT") in new stack**** > > rs0000sr305*CLI> == Using SIP RTP CoS mark 5**** > > == Using SIP RTP CoS mark 5**** > > rs0000sr305*CLI> -- Called SIP/1584**** > > -- Called SIP/1584**** > > rs0000sr305*CLI> -- SIP/1584-0000001e is ringing**** > > -- SIP/1584-0000001e is ringing**** > > rs0000sr305*CLI> -- SIP/1584-0000001e answered DAHDI/i1/5132083300-4** > ** > > -- SIP/1584-0000001e answered DAHDI/i1/5132083300-4**** > > rs0000sr305*CLI> -- Span 1: Channel 0/18 got hangup request, cause 0** > ** > > -- Span 1: Channel 0/18 got hangup request, cause 0**** > > rs0000sr305*CLI> == Spawn extension (entrada, 1584, 2) exited non-zero > on 'DAHDI/i1/5132083300-4'**** > > == Spawn extension (entrada, 1584, 2) exited non-zero on > 'DAHDI/i1/5132083300-4'**** > > rs0000sr305*CLI> -- Hungup 'DAHDI/i1/5132083300-4'**** > > -- Hungup 'DAHDI/i1/5132083300-4'**** > > rs0000sr305*CLI> **** > > ** ** > > Att, > Rafael Saraiva > > > > **** > > 2012/2/17 Danny Nicholas <[email protected]>**** > > I would put a Verbose statement after Proceeding to verify the value > returned from ISDN channel, like this:**** > > - Same => n,Verbose(RC value ${CHANNEL(reversecharge)})**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rafael dos Santos > Saraiva > *Sent:* Friday, February 17, 2012 11:07 AM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users] Block Collect Calls on ISDN trunk**** > > **** > > This is a variable received from the isdn channel. **** > > > Att, > Rafael Saraiva > > > **** > > 2012/2/17 Danny Nicholas <[email protected]>**** > > Did you set CHANNEL(reversecharge) somewhere?**** > > **** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rafael dos Santos > Saraiva > *Sent:* Friday, February 17, 2012 10:26 AM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users] Block Collect Calls on ISDN trunk**** > > **** > > Richard**** > > **** > > **** > > I tried this, but it did not work. What can be the problem? > **** > > [PABX]**** > > exten => _x.,1,Proceeding()**** > > same => n,GotoIf($["${CHANNEL(reversecharge)}" ="-1"]?allow:block)**** > > same => n(allow),Dial(SIP/1584,30,tT))**** > > same => n(block),Hangup()**** > > **** > > Att, > Rafael Saraiva > > **** > > 2012/2/15 Richard Mudgett <[email protected]>**** > > > > How to block collect calls on ISDN trunk? > > > > You need Asterisk v1.8 or later and check the value of > > CHANNEL(reversecharge) in your dialplan. > > > > https://wiki.asterisk.org/wiki/display/AST/Function_CHANNEL > > > Can you give me an example of how to use this function? > > exten => 100,1,Proceeding() > same => n,GotoIf($["${CHANNEL(reversecharge)}" = "-1"]?allow:block) > same => n(allow),Dial() > same => n(block),Hangup() > > Please note that CHANNEL(reversecharge) is only valid on ISDN channels. > > Richard > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users**** > > **** > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users**** > > **** > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users**** > > ** ** > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
