Hi Armin, On 18/02/2012 19:28, Arik Raffael Funke wrote:
in NT mode, the B-channel is not activated automatically. You have to signal the TE side that early-B3 data is available. Then the TE side can activate the B-channel. If the NT-side is chan_capi, use exten => _X.,n,capicommand(progress)
>
I tried what you suggested - but without any luck. To make sure I did not misunderstand you, I now have: exten => _X.,1,capicommand(progress) exten => _X.,n,Dial(CAPI/capi_intern/12345/b)
To help identification of the problem, my console prints the following after capicommand(progress):
[Feb 19 10:45:08] WARNING[3483]: chan_capi.c:4972 show_capi_conf_error: ISDN_INTERN#02: conf_error 0x2001 PLCI=0x103 Command=SELECT_B_PROTOCOL_CONF,0x8495 > ISDN_INTERN#02: CAPI INFO 0x2001: Message not supported in current state
Regards, Arik -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
