On 28/02/2012 7:58 PM, DHAVAL INDRODIYA wrote:
Hi All,
I have one question that if my device is registered over TLS on
asterisk .
is it required that it can only use SRTP for making an outbound calls
or incoming calls too.
No.
how we can disable srtp and only enable TLS.
tlsenable=yes
Make sure you have your certificates setup prior to enabling this.
AFAIK Encryption of RTP isn't on by default, to disable it in your peer
configurations use
encryption=no
is there any dial-plan functions that can help to disable/enable this
SRTP.
Not that I am aware of.
I want following settings.
TLS UDP
USERAGENT =======> ASTERISK =========> VoIpProvider
TLS is used for SIP signalling, what you do with RTP is up to you.
I have phones configured to use TLS and I have enforced RTP encryption
i.e. SRTP by using encryption=yes in the peers configuration an setting
the corresponding setting on the phone.
When an outgoing call is made to my ITSP the communications between the
phone and Asterisk is all encrypted, the communications with my ITSP are
all un-encrypted.
I have also used encryption=allow, this permits the administrator of the
UA to decide if it should use SRTP or otherwise traditional RTP is used.
So is it possible with asterisk.
Yes!
Was that one question!?
Larry.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
