On 12/03/2012 5:27 PM, Ishfaq Malik wrote: > On Fri, 2012-03-02 at 15:32 +0000, Ishfaq Malik wrote: > > I've tried this with the f option on receiveFax but it still isn't > working. Any insight would be helpful as this is driving me a bit potty > > == Using UDPTL CoS mark 5 > == Using SIP RTP CoS mark 5 > -- Executing [200@local:1] Goto("SIP/588-00000000", "fax-in,s,1") > -- Goto (fax-in,s,1) > -- Executing [s@fax-in:1] Answer("SIP/588-00000000", "") > -- Executing [s@fax-in:2] Wait("SIP/588-00000000", "3") > -- Executing [s@fax-in:3] Set("SIP/588-00000000", "FAXFILE=/tmp/fax-588-20120312-092231.tiff") > -- Executing [s@fax-in:4] ReceiveFAX("SIP/588-00000000", "/tmp/fax-588-20120312-092231.tiff,f") > -- Channel 'SIP/588-00000000' receiving FAX '/tmp/fax-588-20120312-092231.tiff' > [2012-03-12 09:22:34] WARNING[4529]: res_fax.c:1508 receivefax_t38_init: channel 'SIP/588-00000000' refused to negotiate T.38 > -- Channel 'SIP/588-00000000' FAX session '0' started > [2012-03-12 09:22:34] WARNING[3763]: chan_sip.c:8740 process_sdp: Unsupported SDP media type in offer: audio 0 RTP/AVP 8 > [2012-03-12 09:22:34] WARNING[3763]: chan_sip.c:8827 process_sdp: Failing due to no acceptable offer found > [2012-03-12 09:22:44] ERROR[4529]: res_fax.c:1344 generic_fax_exec: channel 'SIP/588-00000000' FAX session '0' failure, reason: 'fax session timed-out' (TIMEOUT) > -- Executing [s@fax-in:5] Hangup("SIP/588-00000000", "") > == Spawn extension (fax-in, s, 5) exited non-zero on 'SIP/588-00000000' > -- Executing [h@fax-in:1] NoOP("SIP/588-00000000", "### FAXSTATUS: FAILED") > -- Executing [h@fax-in:2] NoOP("SIP/588-00000000", "### FAXERROR: TIMEOUT") > -- Executing [h@fax-in:3] NoOP("SIP/588-00000000", "### FAXMODE: ") > -- Executing [h@fax-in:4] NoOP("SIP/588-00000000", "### FAXPAGES: 0") > -- Executing [h@fax-in:5] NoOP("SIP/588-00000000", "### FAXBITRATE: ") > -- Executing [h@fax-in:6] NoOP("SIP/588-00000000", "### FAXRESOLUTION: ") > -- Executing [h@fax-in:7] NoOP("SIP/588-00000000", "### REMOTESTATIONID: ") > -- Executing [h@fax-in:8] System("SIP/588-00000000", "mail -s FaxToEmail i...@-net.co.uk< /tmp/fax-588-20120312-092231.tiff") > -- FAX handle 0: [ 040.001588 ], entering CLOSING state > -- Channel 'SIP/588-00000000' FAX session '0' is complete, result: 'FAILED' (FAX_NO_FAX), error: 'T1_TIMEOUT', pages: 0, resolution: 'unknown', transfer rate: '2400', remoteSID: '' > > Thanks in Advance >
Looking at the information you have sent in this posting in certainly appears that the 'f' option has indeed helped however you have another matter to overcome. You may wish to set the following parameters in your peer configuration for 588. ignoresdpversion=yes directmedia=no I use Spandsp FAX successfully. I have also attached an analogue Fax Modem to the FXS port on an SPA8800 and an HT-502 and have been able to receive faxes on them when I last tested, the SPA8800 like the HT-502 are now in storage. Looking at the User Guide for the Vigor 2701 there is an option in the configuration to enable T.38 mode, did you enable it? In my sip.conf I have the following; [general] . . . faxdetect=cng t38pt_udptl=yes,redundancy,maxdatagram=400 ;t38pt_usertpsource=yes . . . [903] ; Cisco SPA8800 FXS Port 3 ; Grandstream HT502 FXS Port 1 ; Analogue FAX Modem attached type=friend defaultuser=903 secret=you_guessed_it call-limit=2 disallow=g722 transport=udp qualify=yes canreinvite=no directmedia=no host=dynamic context=FAX-T38 faxdetect=no Larry. ------------------------------- Try the "ReceiveFax" "F" option and see if it makes a difference we have had great success with it. Thanks Bryant
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users