<snip> > /etc/asterisk/chan_dahdi.conf > ================================================================== > ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit > ;autogenrated on 2012-02-29 > ;Dahdi Channels Configurations > ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak > > [trunkgroups] > > [channels] > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no
Try adding resetinterval = never here. The default is to reset any idle channels every 3600 seconds. Unfortunately, if a channel is being reset just as an incoming call arrives, there is a chance that the channel will get stuck in a resetting state and block any further use of that channel. A quick look at your traces indicates that your channels are "already in use" so an incoming call is cleared with a cause 44. This can happen if there is a call collision or the channel is stuck. I would recommend that you minimize call collisions by making outbound calls pick channels from the opposite end of the channel range as the network. This is usually by using uppercase G in the Dial(DAHDI/G1/number) to the first available channel from the upper end of the channel range. Richard > > ; Required for Embarq / CenturyTel > pridialplan=unknown > prilocaldialplan=local > priindication=outofband > priexclusive=no > > ;Sangoma A104 port 1 [slot:4 bus:9 span:1] <wanpipe1> > switchtype=national > context=from-pstn > group=0 > echocancel=yes > signalling=pri_cpe > channel =>1-23 > > ;Sangoma A104 port 2 [slot:4 bus:9 span:2] <wanpipe2> > switchtype=national > context=from-internal > group=1 > echocancel=yes > signalling=pri_net > channel =>25-47 > > ;Sangoma A104 port 3 [slot:4 bus:9 span:3] <wanpipe3> > switchtype=national > context=from-internal > group=2 > echocancel=yes > signalling=pri_net > channel =>49-71 > > ;Sangoma A104 port 4 [slot:4 bus:9 span:4] <wanpipe4> > switchtype=national > context=from-internal > group=3 > echocancel=yes > signalling=pri_net > channel =>73-95 > ================================================================== <snip> > Installed Software > ================================================================== > asterisk-1.4.43-1.C4.SC > asterisk-addons-1.4.13-1.C4.LSE > asterisk-core-sounds-en-wav-1.4.21-1.C4.SC > asterisk-devel-1.4.43-1.C4.SC > asterisk-extra-sounds-en-gsm-1.4.11-2.C4.LSE > asterisk-libpri-2283-1svn.C4.SC > asterisk-perl-1.01-1.C4.LSE > dahdi-linux-2.6.0-2.6.9_103.plus.c4.LSE.1smp_3.C4.SC > dahdi-tools-2.6.0-2.C4.SC > iaxmodem-static-1.2.0-1.C4.SC > kernel-smp-2.6.9-103.plus.c4.LSE.1 > kernel-utils-2.4-23.el4 > wanpipe-3.5.25-1.SC > wanpipe-modules-3.5.25-kernel.2.6.9.103.plus.c4.LSE.1smp.dahdi.2.6.0_1.SC > ================================================================== -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
