Hi
What should be the optimal settings for HWEC related parameters in
wanpipe1.conf to be able to receive Fax over T.30 on a Sangoma A108DE Card ?
In particular, should I enable echo ? If yes, to what parameter ? What
other values like RXGAIN, TXGAIN should I tune ?
TDMV_HW_DTMF
= YES # YES: receive dtmf events from hardware
TDMV_HW_FAX_DETECT = YES # YES: receive fax 1100hz
events from hardware
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo
cancelation enabled with nlp (default)
# OCT_SPEECH: improves software tone detection by disabling NLP (echo
possible)
# OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out
of incoming media (must have hwdtmf enabled)
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on
the line - could break fax
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables
acustic echo cancelation
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees
software tone detection (possible echo)
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx
audio level to be maintained (-20 default)
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx
audio level to be maintained (-20 default)
HWEC_TX_GAIN = 0 # 0: disable
-24-24: db values to be applied to tx signal
HWEC_RX_GAIN = 0 # 0: disable
-24-24: db values to be applied to tx signal
regards,
Anita
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
