Thanks for answer. Devices PAP2 and SPA3000 works good and use FSK for VMWI and CallerID, so I think TDM410P should also works. CallerID works good. So issue should be in source code of VMWI.
Best regard. Mathieu Therrien, VE2TMQ / VA2IO B. Sc. A. Genie Logiciel www.ve2tmq.ca VoIP: sip:*[email protected] iNUM: +883-5100-099-01841 PSTN: +1-514-316-9498 PGP id : 0xA2882612 PGP FingerPrint : FC7C 9D8A 11BE 7C0E C95B 1D2A E372 338C A288 2612 > On 04/04/2012 04:48 PM, Alec Davis wrote: >> The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that >> option was for the old phones that have a neon light (or equivalent >> LED+ZENER ciruit). >> >> Are other phones off the TDM410P (other than the VTECH) working, or is the >> Vtech the only model with VMWI available to you. >> >> I'm not able to check at the moment, I have copied the asterisk-users list, >> someone else may have had the same problem. >> >> Alec >> >> >>> -----Original Message----- >>> From: [email protected] [mailto:[email protected]] On Behalf Of >>> Mathieu Therrien >>> Sent: Thursday, 5 April 2012 7:21 a.m. >>> To: [email protected] >>> Subject: Fwd: issue with Digium TDM410P >>> >>> Hi I have issue with my Digium TDM400 card, all working good >>> except VMWI on phones connected on FXS ports. >>> I user with regular analog phone VTECH 5.6 GHz. I am unable >>> to activate VMWI. It's a red flashing LED on phone with >>> message display "MESSAGE WAITING". >>> >>> With PAP2 it works good, but now I tried lot config, but none >>> works good. >>> >>> I try lot configs, and search on forum and wiki of Asterisk >>> and Digium. >>> >>> Could you help my with it, please? >>> >>> Best regard. >>> >>> >>> >>> >>> >>> folloing my config. >>> >>> chan_dahdi.conf >>> [...] >>> ; The following keyword 'mwisendtype' enables various VMWI >>> methods on FXS lines (if supported). The default is to send >>> FSK only. The following options are ; available; ; 'fsk' or >>> undefined for exisiting FSK only support. >>> ; 'none' no FSK spill heard every second time you go off hook. >>> ; 'rpas' for existing support ring pulse before FSK ; 'lrev' >>> line reversed while messages exist ; 'hvdc' high voltage, >>> 90Vdc idle voltage ; 'hvac' high voltage neon generation, >>> Following Silicb AN33 ; 'nofsk' Disables FSK MWI spills from >>> being sent out. >>> ; It is feasible that multiple options can be enabled. >>> ; >>> mwisendtype=fsk,lrev,hvac >>> [...] >>> >>> root@io:~# cat /sys/module/xpd_fxs/parameters/vmwi_ioctl >>> Y >>> root@io:~# cat /sys/module/xpd_fxs/parameters/reversepolarity >>> N >>> root@io:~# cat /sys/module/xpd_fxs/parameters/poll_digital_inputs >>> 1000 >>> root@io:~# cat /sys/module/xpd_fxs/parameters/ring_trapez >>> N >>> root@io:~# cat /sys/module/xpd_fxs/parameters/dtmf_detection >>> Y >>> root@io:~# cat /sys/module/xpd_fxs/parameters/debug >>> 0 >>> >>> root@io:~# dahdi_scan >>> [1] >>> active=yes >>> alarms=OK >>> description=Wildcard TDM410P >>> name=WCTDM/0 >>> manufacturer=Digium >>> devicetype=Wildcard TDM410P >>> location=PCI Bus 01 Slot 08 >>> basechan=1 >>> totchans=4 >>> irq=0 >>> type=analog >>> port=1,FXS >>> port=2,FXS >>> port=3,FXS >>> port=4,FXS >>> >>> this is my software info : >>> io*CLI> core show version >>> Asterisk 1.8.10.1 built by root @ io on a i686 running Linux on >>> 2012-03-27 00:53:01 UTC >>> io*CLI> dahdi show version >>> DAHDI Version: 2.6.0 Echo Canceller: HWEC, MG2 >>> >>> and this is my kernel info : >>> root@io:~# lsmod >>> Module Size Used by >>> dahdi_echocan_mg2 4691 4 >>> xpd_fxs 29178 0 >>> xpp 138396 1 xpd_fxs >>> wctdm24xxp 97993 2 >>> dahdi_voicebus 44395 1 wctdm24xxp >>> dahdi 192410 9 dahdi_echocan_mg2,xpd_fxs,xpp,wctdm24xxp,dahdi_voicebus >>> [...] >>> >>> root@io:~# uname -a >>> Linux io 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 >>> Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux >>> >>> >>> >>> >>> >>> -- >>> Mathieu Therrien, VE2TMQ / VA2IO >>> B. Sc. A. Genie Logiciel >>> www.ve2tmq.ca >>> VoIP: sip:*[email protected] iNUM: +883-5100-099-01841 >>> PSTN: +1-514-316-9498 >>> >>> PGP id : 0xA2882612 >>> PGP FingerPrint : FC7C 9D8A 11BE 7C0E C95B 1D2A E372 338C A288 2612 > -- Mathieu Therrien, VE2TMQ / VA2IO B. Sc. A. Genie Logiciel www.ve2tmq.ca VoIP: sip:*[email protected] iNUM: +883-5100-099-01841 PSTN: +1-514-316-9498 PGP id : 0xA2882612 PGP FingerPrint : FC7C 9D8A 11BE 7C0E C95B 1D2A E372 338C A288 2612 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
