The solution: Stop the Asterisk, made a backup of configuration files, delete files and modules previously installed.
Then Reinstall with default config files with "make samples" and I only insert the configuration of Broadvoice and immediately worked. Then I restore the configuration files /etc/asterisk (thinking it was a problem of modules) and stopped working again, It mean that the problem was in the configuration files, or too much or too less lines. So what I made is transfer line x line what I needed from old to new configuration file. As soon detected where it was what was missing or left over, I will publish the list regards, -- Ing CIP. Alejandro Celi Mariátegui <[email protected]> El vie, 04-05-2012 a las 09:23 +0000, [email protected] escribió: > Broadvoice has a lot of problems for the last 2 months > > -----Original Message----- > From: "Ing. CIP Alejandro Celi Mariategui" <[email protected]> > Sender: [email protected] > Date: Fri, 04 May 2012 02:11:11 > To: <[email protected]> > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > <[email protected]> > Subject: [asterisk-users] Broadvoice Got SIP response 503 Service Unavailable > > Hi, > > I'm running Asterisk 1.8.11.1 @office. > > The Broadvoice service work fine with all 1.6 version and early 1.8 > behind a NAT but about 2 months ago stop working. > > No made changes in the firewall NAT rules. Right now I'm @home via my > Xlite softphone working fine without problems > > Any suggestions or thoughts? > > Alex Celi > > > > This is the info > > > central*CLI> sip show peers > Name/username Host Dyn > Forcerport ACL Port Status > 488/488 181.64.96.122 D > 11037 OK (182 ms) > sip.broadvoice.com/305422 206.15.148.221 > 5060 OK (131 ms) > > > sip.conf > externip=190.12.68.20 > localnet=192.168.20.0/255.255.255.0 > localnet=192.168.10.0/255.255.255.0 > nat=comedia > > pedantic=no > register => > [email protected]:XXXXXXXXXX:[email protected] > > [sip.broadvoice.com] > type=friend > host=sip.broadvoice.com > fromdomain=sip.broadvoice.com > fromuser=3054221494 > defaultuser=3054221494 > authname=3054221494 > secret=XXXXXXXXX > context=entrantes > dtmfmode=inband > dtmf=inband > nat=comedia > directmedia=no > qualify=yes > callgroup=1 > pickupgroup=1 > disallow=all > allow=ulaw > allow=alaw > > > > I turned on sip debug. This is what I received > > 181.64.96.122: Is my home IP > 190.12.68.20 or central.cipher.pe: is office IP > 206.15.148.221: Broadvoice Server > > > <--- SIP read from UDP:181.64.96.122:11037 ---> > INVITE sip:[email protected] SIP/2.0 > Via: SIP/2.0/UDP > 192.168.7.33:19116;branch=z9hG4bK-d8754z-81993d517bc9b121-1---d8754z-;rport > Max-Forwards: 70 > Contact: <sip:[email protected]:11037> > To: "90018006273999"<sip:[email protected]> > From: "488"<sip:[email protected]>;tag=93cce179 > Call-ID: ZDk2MDVkY2RhMTE2YjRkMmVhMjliMTRiYWIwOTdiM2M. > CSeq: 1 INVITE > Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, > SUBSCRIBE, INFO > Content-Type: application/sdp > User-Agent: X-Lite release 1014k stamp 56015 > Content-Length: 235 > > v=0 > o=- 8 2 IN IP4 192.168.7.33 > s=CounterPath X-Lite 3.0 > c=IN IP4 192.168.7.33 > t=0 0 > m=audio 2424 RTP/AVP 0 8 3 101 > a=fmtp:101 0-15 > a=rtpmap:101 telephone-event/8000 > a=alt:1 1 : hC2wRjti 7Lt7EhaI 192.168.7.33 2424 > a=sendrecv > <-------------> > --- (12 headers 10 lines) --- > Sending to 181.64.96.122:11037 (NAT) > Using INVITE request as basis request - > ZDk2MDVkY2RhMTE2YjRkMmVhMjliMTRiYWIwOTdiM2M. > Found peer '488' for '488' from 181.64.96.122:11037 > > <--- Reliably Transmitting (no NAT) to 181.64.96.122:11037 ---> > SIP/2.0 401 Unauthorized > Via: SIP/2.0/UDP > 192.168.7.33:19116;branch=z9hG4bK-d8754z-81993d517bc9b121-1---d8754z-;received=181.64.96.122;rport=11037 > From: "488"<sip:[email protected]>;tag=93cce179 > To: "90018006273999"<sip:[email protected]>;tag=as77d2f824 > Call-ID: ZDk2MDVkY2RhMTE2YjRkMmVhMjliMTRiYWIwOTdiM2M. > CSeq: 1 INVITE > Server: Asterisk PBX 1.8.11.1 > Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, > NOTIFY, INFO, PUBLISH > Supported: replaces, timer > WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", > nonce="0a1fded4" > Content-Length: 0 >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
