I have iaxmodem version 1.2.0 installed on my system.
I have set the following in the IAX configuration file, SIGHUP'd
FaxGetty and submitted a single page outbound fax via Asterisk;
Class1RMQueryCmd: "!24,48,72" # enable this to disable V.17
receiving
Class1TMQueryCmd: "!24,48,72" # enable this to disable V.17
sending
The resulting output from my T.38 Gateway reports the following;
-- Connection Statistics
Bit Rate :7200
ECM : No
Pages : 1
-- Hungup 'IAX2/iaxmodem0-11055'
I also tested with the maximum speed set to 4800, the image was received
however the responses to EOP timed out, I don't know if the is to do
with my Asterisk T.38 gateway or my VoIP providers T.38 gateway. The
result was the fax was retried for the defined number of attempts.
Cheers,
Larry.
On 16/05/2012 6:28 PM, gincantalupo wrote:
Hi all,
I'm trying to lower my iaxmodem speed but still I haven't found any
solution...I tried to add
Class1RMQueryCmd: "!24,48,72"
to config.IAXtty but does not work...Hylafax says it it running at 9600
(sometimes at 14400) baud..
Any ideas?
Thank you.
Giorgio
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
