----- Original Message -----
> From: "Danny Nicholas" <[email protected]>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <[email protected]>
> Sent: Monday, July 9, 2012 8:17:25 AM
> Subject: Re: [asterisk-users] SRTP Encryption Per Device
>
> I think so - set UDP and TLS on allow= in sip.conf, then set
> transport=udp
> on your "non-secure" devices.
>
Those settings do not affect SRTP.
SRTP can be enabled on a device basis using the encryption setting. From
the provided sip.conf.sample:
;encryption=no ; Whether to offer SRTP encrypted media (and only SRTP
encrypted media)
; on outgoing calls to a peer. Calls will fail with
HANGUPCAUSE=58 if
; the peer does not support SRTP. Defaults to no.
In the DEVICE CONFIGURATION section, encryption is explicitly listed as a
supported setting for devices.
--
Matthew Jordan
Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
