Hi after src/channels/chan_modem_aopen.c I made another channel driver called src/channels/chan_modem_usr2976.c. I made all the changes it required.
The driver loads fine, initializes modem etc: Asterisk Dynamic Loader Starting: �[chan_modem.so]�=>�(Generic�Voice�Modem�Driver) ��==�Loading�modem�driver�chan_modem_usr2976.so�=>�(U.S.�Robotics�56K�Voice INT V5.19.1, OEM 2976 driver) ����--�Configured�modem�/dev/ttyS4�with�driver�USR2976�(3Com�Corp.�Model U.S. Robotics 56K Voice Revision 5.19.1�7/15/99) My problem is with asterisk usage. I know I am missing something I just don't know what. I made these changes to the /etc/*.conf files that installed after the compilation of the source code: modem.conf: ��������driver=usr2976 ��������type=usr2976 ��������device�=>�/dev/ttyS4 modules.conf: ��������load�=>�chan_modem.so extensions.conf: ��������;TRUNK=Zap/g2�����������������������������������;�Trunk�interface ��������TRUNK=usr2976/ttyS4 I am not sure how to make a call to USR modem from PSTN ring the Console, and I dont know how to dial out. when typing dial 93102355 on CLI i get the following error CLI> dial 93102355 Feb 11 00:03:43 WARNING[245776]: channel.c:1647 ast_request: No channel type registered for 'usr2976' Feb 11 00:03:43 NOTICE[245776]: app_dial.c:527 dial_exec: Unable to create channel of type 'usr2976' ��==�Everyone�is�busy�at�this�time Urgent handler *CLI> When I change the modem.conf to: ��������type=autodetect I get the same response. Agron... _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
