The IP Phones that I am using is the Digium D40, but did not find any place to enable the RPID, I do not know if they are enabled by default.
Any advise? Regards Bilal ---------------------------------- > Hi, > > You need to set rpid on the calling phone settings, if that > phone knows > what to do with RPID. Then you need to set allowrpid=yes in > the sip peer > settings of A party and B party. I did that on CISCO 79X0 > phones and it > worked perfectly, > > Regards, > Sammy > > > On Tue, Aug 7, 2012 at 3:43 AM, bilal ghayyad <bilmar...@yahoo.com> > wrote: > > > Hi All; > > > > Asterisk 1.8.11-cert1 > > > > I need to do the following, how? > > > > If my extension is 500 and I need to call the extension > 501, so when > > dialing 501, then I need to be able to see the name of > the 501 (for > > example, the name was: Mike, so I need to see at my IP > Phone that I am > > calling Mike which is the name of the destination). > > > > How? > > > > Regards > > Bilal -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users