Hi Larry,
Am 26.08.2012 03:57, schrieb Larry Moore:
On 26/08/2012 3:45 AM, Markus wrote:
When I receive an incoming call from a SIP peer where I've configured
disallow=all
allow=alaw
(and no other codec)
I can see the following NOTICE on the console:
Dropping incompatible voice frame SIP/peer07-0000007c of format ulaw
since our native format has changed to (alaw)
My question is: where can I change the native format from ulaw to alaw
(or something else)? Is ulaw, as the native format, adjustable in some
config file or is it hard-coded into Asterisk?
It doesn't seem to have any effect on the voice quality but the messages
on the console are quite annoying.
I suspect you will find the frequency of these messages is the value you
have set for rtpkeepalive.
I would suggest you include the following in your peer's configuration;
rtpkeepalive=0
thanks! Unfortunately, that didn't change anything. Any other advise?
I don't get where it's configured that Asterisk' default "hard-coded"
codec is ulaw... at least that's the information we get from that
message, right?
Regards
Markus
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
