On 9/12/2012 1:41 AM, Hans Witvliet wrote: > On Wed, 2012-09-12 at 00:01 -0500, Vladimir Mikhelson wrote: >> Hans, >> >> I did not try 10 or 11 as I run 1.8.15. Following are the related >> conf files. >> >> gtalk.conf >> >> [General] >> context = default >> allowguest = yes ; Required if you want to accept calls >> from people Not on your contact list. >> bindaddr=<private IP> ;; These two settings are very critical for >> getting >> externip=<public IP> ;; gtalk audio with Asterisk server behind >> NAT >> disallow=all >> allow=ulaw >> >> [guest] ;;special account for options on >> guest account >> disallow=all >> allow=ulaw >> context=from-trunk >> connection=<Jab01> >> >> jabber.conf >> >> [general] >> debug=no ;;Turn on debugging by default. >> autoprune=no ;;Auto remove users from buddy list. >> autoregister=yes ;;Auto register users from buddy list. >> >> [Jab01] ;; Label >> type = client ;; Client or Component connection >> serverhost = talk.google.com >> ;; Route to server >> username = [email protected]>/asterisk ;; Username with >> optional resource. >> secret = <Google password> >> ;; Password >> priority = 1 ;; Resource priority >> port = 5222 ;; Port to use, defaults to 5222 >> usetls = yes ;; TLS is required by talk.google.com, >> you'll get a 'socket read error' without >> usesasl = yes ;; Use sasl or not >> timeout=100 ;; Timeout on the message stack >> status=available ;; One of: chat, available, away, >> xaway, or dnd >> statusmessage = "Connected via Asterisk" ;; Custom status message >> >> [Jab02] >> type = client >> serverhost = talk.google.com >> username = [email protected]/asterisk >> secret = <Google password 2> >> priority = 1 ;; Resource priority >> port = 5222 ;;Port to use, defaults to 5222 >> usetls = yes ;;TLS is required by talk.google.com, >> you'll get a 'socket read error' without >> usesasl = yes ;;Use sasl or not >> buddy=<Buddy1>@gmail.com ;;Manual addition of buddy to list. >> buddy=<Buddy2>@gmail.com ;;Manual addition of buddy to list. >> timeout=100 >> status=available >> statusmessage = "Connected via Asterisk" >> >> [Jab03] >> >> [Jab04] >> >> and so on. >> >> Reagrds, >> Vladimir >> > Thanks Vladimir, > > Will digg up an 1.8 machine and give it a try! > afaics the only diference is that i am using a local xmpp server > (ejabberd) instead of google, but that should only make things easier i > think... > > Hans > > > Hans,
Good luck then. Please keep us posted. -Vladimir -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
