On 05-10-12 15:27, Joshua Colp wrote:
Jonas Kellens wrote:
Using this will make Asterisk hang. Done that in the past and result was
that Asterisk hung after a certain amount of asterisk -rx "command". So
my experience is that this is not the correct solution.
If only ChanIsAvail could return the correct value...
You may have missed it but I sent an email detailing that... just add
the 's' option to your use of ChanIsAvail. As I also said if you don't
want to do that then check if AVAILCHAN is set or not.
Those are your two options.
the 's' option is about a channel in use. I don't see the link with a
SIP peer that is registrated or not.
if AVAILCHAN is set, does this mean that the SIP peer is reachable ??
Jonas.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
