Minor correction below: On Tue, Oct 09, 2012 at 12:32:44PM -0500, Shaun Ruffell wrote: > On Tue, Oct 09, 2012 at 11:46:04AM -0500, Mitch Claborn wrote: > > > > (Now if I just didn't have to wait to get on-site where those lines > > are to try it. Too bad there isn't a DAHDI emulator for SIP lines.) > > You can use dynamic DAHDI spans to simulate this on a single box if you > would with DAHDI-Linux 2.6.0+. Something like: > > In /etc/dahdi/system.conf use: > dynamic=loc,1:0,4,0 > fxsks=49-52
Should make the above line: fxsks=1-4 > dynamic=loc,1:1,4,0 > fxoks=53-56 > loadzone = us > defaultzone = us > And in /etc/asterisk/chan_dahdi.conf: > > signalling=fxs_ks > context=pstn > group=0 > channel=>1 > channel=>2 > channel=>3 > channel=>4 > > signalling=fxo_ks > context=simulation > group=63 > channel=>51 > channel=>52 > channel=>53 > channel=>54 > > Now you can start up asterisk and group 0 will be your "normal" group > and you can answer these lines in the "simulation" context. > > Dynamic local spans have been around for awhile but I've only used them > on a regular basis since 2.6.0+. > > Cheers, > Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
