Once an option is set in the chan_dahdi.conf file it applies to every channel => line listed after the setting, until the option is changed. This is all you really know.
-----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of C. Savinovich Sent: Wednesday, October 10, 2012 2:58 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Tips for installing and configuring Digum cards >>(I'm sure its written somewhere, I just can't be bothered to look right now.) If you come across it, please let me know because other than getting a hint somewhere after 2 hours of googling, I would not have known. >>And aren't the characteristics 'cumulative' ? Can't tell you. You seem to hint that they are cumulative, although as far I tested, they weren't. characteristic-a = foo characteristic-b = bar channel = 1 characteristic-b = bar channel = 2 channel 1 has foo and bar. Channel 2 has bar only. ...(?) In any case, my approach was not to take any chances and make sure all characteristics I use are cleared of any previous values in each channel declaration Christian Savinovich VoIP & Telephony Consultant 646-982-3572 -------- Original Message -------- Subject: Re: [asterisk-users] Tips for installing and configuring Digum cards From: Steve Edwards <asterisk....@sedwards.com> Date: Wed, October 10, 2012 2:27 pm To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> On Wed, 10 Oct 2012, C. Savinovich wrote: > - Not written anywhere, but the way chan_dahdi.conf is read, there are > no [XXXX] separators, so any parameters in the file apply to the first > "channel" statement it finds. (I'm sure its written somewhere, I just can't be bothered to look right now.) Wouldn't it be more accurate to say you specify the characteristics and then specify the channels the characteristics apply to? And aren't the characteristics 'cumulative' such that characteristic-a = foo characteristic-b = bar channel = 1 characteristic-b = baz channel = 2 results in channel 1 having foo and bar while channel 2 has foo and baz? -- Thanks in advance, ------------------------------------------------------------------------- Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST Newline Fax: +1-760-731-3000 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users