On 10/11/2012 05:39 PM, Christopher Harrington wrote: > First post to this mailing list. I'll keep it brief: My D40 phones > don't show the "name" component of CALLERID. > It only displays the number. This includes calls originating from PSTN > with their own CID already set, and calls > where we've specifically filled in this data. Changing the destination > of my test extension to a softphone (zoiper > in this case) correctly displays the information. sip.conf already > contains sendrpid=pai. > > From what I can tell, this appears to be a Digium phone limitation. Or > am I missing something crucial? >
No, the D40s display the name. Using the following configuration in sip.conf: [peer01] type = peer secret = xxxx callerid = "D40 01" <101> host = dynamic sendrpid = pai disallow = all allow = ulaw allow = g722 And extensions.conf: exten => 101,1,NoOp() same => n,Set(CALLERID(name)=foo) same => n,Dial(SIP/101) same => n,Hangup() Shows the following on the D40: 101 foo If I remove the CALLERID function call, the D40 shows: 101 D40 01 Note that this is using the 1.1.0 firmware. I imagine there is a configuration issue somewhere. You may want to provide your entire configuration, or - since you have purchased phones from Digium - call technical support. They should be able to help you resolve this issue. -- Matthew Jordan Digium, Inc. | Engineering Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: http://digium.com & http://asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
