On Thu, Oct 18, 2012 at 1:49 AM, Steve Totaro < [email protected]> wrote:
> > > On Thu, Oct 18, 2012 at 1:35 AM, Jared Baxley <[email protected]>wrote: > >> I was following Digium's instructions to the letter to install g729. but >> upon telling asterisk to load the module, the system hung. >> >> after a few minutes later a CTRL-C and attempted to run the command >> again. Same result. any g729 show command returns nothing... no error no >> results. >> >> Reboot the server and asterisk will not process calls. Freepbx shows the >> following. >> >> [2012-Oct-18 01:21:04] [INFO] (bin/retrieve_conf:109) - found language >> dir fr for directory, not installed on system, skipping >> [2012-Oct-18 01:21:07] [FATAL] (libraries/utility.functions.php:429) - >> retreive_conf failed to get engine information and cannot configure up a >> softwitch with out it. Error: ERROR-UNABLE-TO-PARSE >> [2012-Oct-18 01:21:07] [CRITICAL] (admin/functions.inc.php:366) - >> [NOTIFICATION]-[freepbx]-[RCONFFAIL] - retrieve_conf failed, config not >> applied >> >> This seems to indicate that the g729 module is working >> >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: G.729A transcoding >> module version 1.8.0_3.1.5, Copyright (C) 1999-2009 Digium, Inc. >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: This module is supplied >> under a commercial license granted by Digium, Inc. >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: Please see the full >> license text supplied by the accompanying >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: "register" utility, or >> ask for a copy from Digium. >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: This product includes >> software developed by the OpenSSL Project >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: for use in the OpenSSL >> Toolkit. (http://www.openssl.org/) >> [2012-10-18 01:21:04] NOTICE[4717] codec_g729a.c: Copyright (C) 1998-2006 >> The OpenSSL Project >> >> [2012-10-18 01:21:04] VERBOSE[4717] manager.c: == Manager registered >> action G729LicenseStatus >> [2012-10-18 01:21:04] VERBOSE[4717] manager.c: == Manager registered >> action G729LicenseList >> [2012-10-18 01:21:04] VERBOSE[4717] codec_g729a.c: == Host-ID: >> 60:b6:d3:a0:c9:be:6e:46:74:41:07:b3:8e:76:59:b1:ba:5c:59:05 >> [2012-10-18 01:21:04] VERBOSE[4717] codec_g729a.c: == Found license >> 'G729-XXXXXXXXXXX' providing 40 channels >> [2012-10-18 01:21:04] VERBOSE[4717] codec_g729a.c: == Found total of 40 >> G.729 licenses >> >> How do i roll this back? Just delete codec_g729a.so ? >> >> > You can do a noload in modules.conf. This doesn't appear to be the > problem though. It may be. Did you try saving a change in FreePBX and > applying it? > > It seems more like a FreePBX config error that should be overwritten by > FreePBX database to flat files. > > Thanks, > Steve Totaro > See here http://www.freepbx.org/forum/freepbx/users/apply-configuration-changes-errors-with-failed-to-get-engine-info-retreive-conf Very similar problem with FreePBX, your G729 looks fine. Check permissions and ownership of any files you changed. Thanks, Steve Totaro
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
