I haven't used send text before in the ami but I would expect the channel to be the fully qualified one. When you do core show channels in the cli you get a longer channel name that's unique. I'm not 100% on this as I haven't used it but when in the ami it says to send channel, it usually means the unique current channel.
The Asterisk wiki at wiki.asterisk.org is pretty good at showing you what's required, although their examples could be better, Hope this helps, Dan Jenkins On Nov 18, 2012, at 6:36, Face <[email protected]> wrote: > Hello all, > > I am running Asterisk 10.10.0 and I can send Message between SIP's no > problem. However, I would like to be able to send send Message to a > SIP from AMI Or CLI. I check the ListCommands On the AMI and it > don't have MessageSend. Therefore, I try the SendText. > > AMI: > Action: SendText" > Channel: SIP/600" > Body: This is a test. > Message: This is a test. > Extension: 600"; > > > Response: Error > Message: No such channel > > Any help would be much appreciated. > > -- > Sincerely, > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
