Richard Kenner wrote:
Not that many RTP packets are required. It's just important to see the
SIP signaling and where traffic is coming/going from with the network
topology in mind. That way a clearer picture of where it's saying media
should go to, where it's sending media from, etc can be gleamed. Once
that is figured out then the problem can be isolated.
OK, I reproduced it on this machine. It's a total of only 1293
packets, taken on this end. First call didn't work: I heard nothing
coming inbound. Second call worked, well enough that there was feedback
(both phones and the desktop were in the same room).
Few suggestions:
1. Remove allow=gsm from your sip.conf and reload
2. Disable ZRTP in Jitsi by going into Options -> Accounts -> Selecting
account -> Edit -> Security -> Uncheck "Enable support to encrypt calls".
See if that improves the situation.
--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
