--- On Fri, 12/7/12, Steve Totaro <stot...@totarotechnologies.com> wrote:
> Why don't your span numbers match? 1-4 but you have > 3-6 in your .conf. What do you mean? I have the following: span=3,1,0,CCS,AMI span=4,2,0,CCS,AMI span=5,3,0,CCS,AMI span=6,4,0,CCS,AMI The first parameter is the port number (3-6). The second parameter is Timing (1-4). Is it mandatory to begin the port numbering with 1? Or does it simply have to be sequential? Anyway, I set the span port numbers from 3 to 6 because I based myself on the output of dahdi_scan which was the following: # dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV I Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV I location=PCI Bus 00 Slot 04 basechan=1 totchans=4 irq=18 type=analog port=1,FXO port=2,FXO port=3,FXO port=4,FXO [2] active=yes alarms=OK description=Wildcard TDM2400P name=WCTDM/0 manufacturer=Digium devicetype=Wildcard TDM2400P location=PCI Bus 00 Slot 05 basechan=5 totchans=24 irq=20 type=analog port=5,FXO port=6,FXO port=7,FXO port=8,FXO port=9,FXO port=10,FXO port=11,FXO port=12,FXO port=13,none port=14,none port=15,none port=16,none port=17,none port=18,none port=19,none port=20,none port=21,none port=22,none port=23,none port=24,none port=25,none port=26,none port=27,none port=28,none [3] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 00 Slot 06 basechan=29 totchans=3 irq=23 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [4] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 00 Slot 06 basechan=32 totchans=3 irq=23 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [5] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 3 name=B4/0/3 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 00 Slot 06 basechan=35 totchans=3 irq=23 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [6] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 4 name=B4/0/4 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 00 Slot 06 basechan=38 totchans=3 irq=23 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS I assumed I should use as port numbers the values within square brackets above. Still, I'm wondering why outgoing calls don't work (dial/g2 in my example) if I disconnect the cable from: span=3,1,0,CCS,AMI and leave all the others connected. Vieri -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
