----- Original Message -----
From: "Matthew Jordan" <[email protected]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Saturday, December 08, 2012 12:43 AM
Subject: Re: [asterisk-users] BLF and call-limit in 1.8
Thanks for your reply. I just tested creating a peer in sip.conf and that
works as it should. In addition, the value of call-limit in sip show peer
<peer> is correct (the same as in sip.conf, which in this case is 4).
-Pan
When you enable call-limit globally for all peers, it sets the
call-limit for all peers to INT_MAX. Hence why each device can accept
quite a few calls.
The setting you're actually toggling is 'callcounter'. When its enabled
(boolean true), it sets call-limit to INT_MAX. If not present, then the
call-limit value is used. This is why every setting but '1' set the
call-limit to 0.
Since you're using Realtime, there me a number of issues at play. Do you
have this problem with a peer defined in sip.conf?
--
Matthew Jordan
Digium, Inc. | Engineering Manager
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
