2013/3/3 Mc GRATH Ricardo <[email protected]> > Hi Olivier > > It seems wrong configuration, because according to your mail Asterisk it > will be acting as terminal mode (ie Patton gateway acting as network and > asterisk as terminal). > But Asterisk message is indicated Asterisk a s a NT mode [ 212.226050] > wctdm24xxp 0000:0a:01.0: xhfc: Configuring port 0 span 1 in > NT mode with termination resistance ENABLED. > It could help by checking parameters on dahdi-channels if signalling = > bri_cpe_ptmp # The signalling for TE mode > Best regards > > Mc GRATH Ricardo > E-Mail [email protected] > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Maybe my previous post was not clear on that but I made two different experiments : A- one (successful) with Asterisk acting as terminal (TE/ptmp) and Patton as network B- one (unsuccessful) with Asterisk acting as network (NT/ptmp) and Patton as terminal Now I'm focusing on the latter case. My /etc/dahdi/system.conf contains: span=1,0,0,ccs,ami,nt,term (I also tried with DISABLED termination without success) My /etc/asterisk/dahdi-channels.conf contains: signalling = bri_net_ptmp ... but still : CLI> pri show spans PRI span 1/0: In Alarm, Up, Active
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
