> libss7-trunk cannot be used with any released version of Asterisk.
Thank you Richard.
I could install libss7-branche 1.0 successfully.
But i faced another problem. When i`m dialling over my SS7 enabled E1,
caller-id did not presentaded correctly on the destination phone.
I`m using these two method to change screening&Presentation parameters of IAM
message:
1.
exten => _X.,1,Dial(DAHDI/g1/${EXTEN}, 10, u(allowed)f(75462541))
2.
exten => _X.,1,Set(CALLERID(num)=75462541)
exten => _X.,n,Set(CALLERID(pres)=allowed)
;exten => _X.,n,Set(CALLERID(num-pres)=allowed)
exten => _X.,n,Dial(DAHDI/g1/${EXTEN})
With both method, in the outgoing IAM message from asterisk to Telecom,
Presentation&Screening are as follow but caller-id on the destination phone is
'00000000'.
[1] Calling Party Number:
[1] Nature of address: 3
[1] NI: 0
[1] Numbering plan: 1
[1] Presentation: 0
[1] Screening: 3
[1] Address signals: 75462541
Can you please guide me?
Best Regards.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
