Re: [asterisk-users] WARNING[28151] from CLI

Wed, 27 Mar 2013 06:38:57 -0700 

you have already listed the two config files for using zaptel.
on first sight, they look ok to me (did not use zaptel for years now)
maybe you should definitely comment out any span that is not in use... or do the opposite. i´ve seen this warning several times, but i cant remember it had anything to do with spans 
being configured but not used.
it always had something to do with timing or even defective cards or cabling or even wrong 
settings on providers´ site.
what changes were made to the system so that these warnings occur? or have they been visible from the very start? do they affect telefony (e.g. loss of calls, one side audio only etc.)? how much load (concurrent calls) is on the asterisk, does the warning occur periodically or 
only a few times?
these are all questions you should ask yourself to help you find the answer yourself... it can 
be very frustrating sometimes, but for me, thats all i can tell about.

regards,
yves

Am 27.03.2013 13:06, schrieb Salaheddine Elharit:
thank you for your help ,but which configure script and when i can find this script ? in etc/asterisk 


best regards

2013/3/27 Thorsten Göllner <t...@ovm-group.com <mailto:t...@ovm-group.com>>

    You do use only span 1 and 6? So the other ports are not plugged?
    That is the cause for the warnings. I use a Sangoma E1-Card. The
    configure script gives me the option "unused" for any port. Maybe
    your configure script offers you the same option.

    Am 27.03.2013 11:54, schrieb Salaheddine Elharit:

    Hi

    i use 2 digium cards 1 card with 2 ports and the second card with
    4 ports

    but actually i use just the span 1 and span 6

    Asterisk 1.4-r110474M

    i use E1 ports


    zaptel.conf

    # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013
    -- do not hand edit

    # Zaptel Configuration File

    #

    # This file is parsed by the Zaptel Configurator, ztcfg

    #

    # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED

    span=1,1,0,ccs,hdb3

    # termtype: te

    bchan=1-15,17-31

    dchan=16


    # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED

    span=2,2,0,ccs,hdb3

    # termtype: te

    bchan=32-46,48-62

    dchan=47


    # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"

    # span=3,3,0,ccs,hdb3

    # termtype: te

    # bchan=63-77,79-93

    # dchan=78


    # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"

    # span=4,4,0,ccs,hdb3

    # termtype: te

    # bchan=94-108,110-124

    # dchan=109


    # Span 5: TE2/1/1 "T2XXP (PCI) Card 1 Span 1"

    span=5,5,0,ccs,hdb3

    # termtype: te

    bchan=125-139,141-155

    dchan=140


    # Span 6: TE2/1/2 "T2XXP (PCI) Card 1 Span 2"

    span=6,6,0,ccs,hdb3

    # termtype: te

    bchan=156-170,172-186

    dchan=171


    # Global data


    loadzone= us

    defaultzone= us




    etc/asterisk/zapata.conf


    [channels]

    context=default

    hidecallerid=no

    callwaiting=yes

    usecallingpres=yes

    callwaitingcallerid=yes

    threewaycalling=yes

    transfer=yes

    canpark=yes

    cancallforward=yes

    callreturn=yes

    rxgain=0.0

    txgain=0.0


    group=1

    switchtype=euroisdn

    signalling=pri_cpe

    callgroup=1

    pickupgroup=1

    immediate=no

    channel => 1-15,17-31


    group=2

    callgroup=2

    switchtype=qsig

    signalling=pri_net

    callerid=mycallerid

    immediate=no

    channel => 156-170

    channel => 172-176

    channel => 125-139

    channel => 141-155


    thanks and regards



    2013/3/27 Yves A. <yves...@gmx.de <mailto:yves...@gmx.de>>

        Am 26.03.2013 17:57, schrieb Salaheddine Elharit:

        Hello,

         i have all the time this warning i use asterisk 1.4 all
        works without issue i don't have any problem (i can use the
        inbound and outbound calls without issue)

        i just want to know what is this WARNING

        thanks and regards


         WARNING[28151]: chan_zap.c:2404 pri_find_dchan: No
        D-channels available!  Using Primary channel 140 as
        D-channel anyway!


        this can have different causes... mostly a wrong setting in
        your zaptel configuration file... this could be e.g.
        mixing american / european settings (e1/t1),
        wrong timing settings,
        wrong master / source clock setting,
        [...]
        post more details... what span (e1 or t1), which hardware,
        driver version, asterisk version, config files...


        regards,






--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
                http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
    http://lists.digium.com/mailman/listinfo/asterisk-users



--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to