On 03/29/2013 07:05 PM, Hans Witvliet wrote: > Hi all, > > I had to re-install a new machine and noticed that by default, ip was > only listening on 0.0.0.0, thus ipv4 only. Easily changed. > > However, when looking at iax.conf, I found here the same, but it looks > like iax is still ipv4 only? > If i change "bindaddr=192.168.0.1" towards "bindaddr=::", and look with > "lsof -i" iax is still not listening on V6. > > Is iax/ipv6 still on the "TODO-list" ? >
The IAX2 channel driver does not currently support IPv6. While it would be a nice improvement, there are no plans to perform this work at this time. Of course, the Asterisk open source developer community could take this work on, which would be a welcome addition to Asterisk 12. Matt -- Matthew Jordan Digium, Inc. | Engineering Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: http://digium.com & http://asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
