BTW - what was exactly the problem when trying to bridge the two channels that you have sent to the wait application?
On Wed, May 15, 2013 at 4:29 PM, Ioan Indreias <[email protected]> wrote: > I think you could use twice the Park action to park the channels -> > https://wiki.asterisk.org/wiki/display/AST/ManagerAction_Park > > In the end you will have to bridge the parked channels. > > HTH, > Ioan > > > On Wed, May 15, 2013 at 1:03 PM, Lenz Emilitri <[email protected]>wrote: > >> I never actually used parking, but should it work if I call the Park >> application as the second leg of the Originate (w/o going through the >> dialplan)? I dont seem to be able to make it work. >> l. >> >> >> 2013/5/15 Mitul Limbani <[email protected]> >> >>> The dial n bridge might work, but there ain't indefinite wait in that >>> scenario. >>> Direct calls to parking you might try Local(70X@from-internal) but I m >>> not sure if this method works reliably. >>> >>> The method I mentioned is used by vicidial and it works flawlessly, yes >>> it comes with some computing load, however you can try the newer ConfBridge >>> app to see if its cheaper. >>> >>> Mitul >>> >>> On Wednesday, May 15, 2013, Lenz Emilitri wrote: >>> >>>> Hi Mitul, >>>> I agree that the dialplan way is easier, but it's a client requirement >>>> to avoid using it. I was wondering if there was a way to send a call >>>> directly to a parking slot right from the originate, because that is >>>> cheaper than running conferences, and then joining the second call right to >>>> the parked call, so that all we have to do is two originates. >>>> l. >>>> >>>> >>>> 2013/5/14 Mitul Limbani <[email protected]> >>>> >>>>> Dial first call and put it into a conference, then dial second call >>>>> and put him into same conference to bridge both. >>>>> >>>>> However dial plan way is much more simpler. >>>>> >>>>> Mitul >>>>> >>>>> >>>>> On Tuesday, May 14, 2013, Lenz Emilitri wrote: >>>>> >>>>>> >>>>>> Hi all, >>>>>> I need some advice - I have been working on originating multiple >>>>>> calls using AMI and then joining them. >>>>>> What I want to do is: >>>>>> - dial call 1 (where the caller is in a "channel" format, like >>>>>> SIp/1234 or Local/1234@ext) and "park" it somehow >>>>>> - dial call 2 (where again the caller is in channel format) and join >>>>>> it to the previous call. >>>>>> >>>>>> As a requirement, I cannot use the dialplan as an end-point (as I >>>>>> cannot change it) but need to use the AMI only. >>>>>> >>>>>> I tried doing something like: >>>>>> >>>>>> Action: Originate >>>>>> Channel: Local/300@from-internal >>>>>> Async: 1 >>>>>> Application: Wait >>>>>> Data: 1973 >>>>>> >>>>>> So that the call goes to 300 and then basically stays there forever, >>>>>> and then I dial again: >>>>>> >>>>>> Action: Originate >>>>>> Channel: Local/500@from-internal >>>>>> Async: 1 >>>>>> Application: Wait >>>>>> Data: 1973 >>>>>> >>>>>> And then try to bridge the results, but it does not seem to work. >>>>>> What I would like to do would be more on the lines of: >>>>>> >>>>>> Originate call 1 and park it (using a park or waiting) >>>>>> Originate call 2 and bridge it immediately to call1 (using the >>>>>> Application part) >>>>>> >>>>>> But maybe I am missing something? is there anybody who has better >>>>>> suggestions? >>>>>> >>>>>> Thanks >>>>>> l. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Loway - home of QueueMetrics - http://queuemetrics.com >>>>>> Test-drive WombatDialer beta @ http://wombatdialer.com >>>>>> >>>>> >>>>> >>>>> -- >>>>> Regards, >>>>> Mitul Limbani, >>>>> Chief Architech & Founder, >>>>> Enterux Solutions Pvt. Ltd. >>>>> 110 Reena Complex, Opp. Nathani Steel, >>>>> Vidyavihar (W), Mumbai - 400 086. India >>>>> http://www.enterux.com/ >>>>> http://www.entvoice.com/ >>>>> email: [email protected] >>>>> DID: +91-22-71967121 >>>>> Cell: +91-9820332422 >>>>> >>>>> >>>>> >>>>> -- >>>>> _____________________________________________________________________ >>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>>>> http://www.asterisk.org/hello >>>>> >>>>> asterisk-users mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>>> >>>> >>>> >>>> >>>> -- >>>> Loway - home of QueueMetrics - http://queuemetrics.com >>>> Test-drive WombatDialer beta @ http://wombatdialer.com >>>> >>> >>> >>> -- >>> Regards, >>> Mitul Limbani, >>> Chief Architech & Founder, >>> Enterux Solutions Pvt. Ltd. >>> 110 Reena Complex, Opp. Nathani Steel, >>> Vidyavihar (W), Mumbai - 400 086. India >>> http://www.enterux.com/ >>> http://www.entvoice.com/ >>> email: [email protected] >>> DID: +91-22-71967121 >>> Cell: +91-9820332422 >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> >> -- >> Loway - home of QueueMetrics - http://queuemetrics.com >> Test-drive WombatDialer beta @ http://wombatdialer.com >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
