On 03/06/13 23:04, Daniel Pocock wrote: > On 03/06/13 19:18, Jason Parker wrote: >> >> On 06/03/2013 12:03 PM, Daniel Pocock wrote: >>> I tried building manually from the source RPM >>> >>> Before running rpmbuild, I installed libsrtp-devel and I notice that >>> res_srtp.so is generated during the build >>> >>> However, the rpmbuild fails for other reasons (see the other email I >>> sent to the list about mISDNutils-devel and other spec file errors) >>> >>> Can you confirm the exact procedure you recommend for rpmbuild on a >>> CentOS6 system >> rpmbuild --rebuild --without tds --without misdn somepackage.src.rpm >> > Now trying it on a fresh VM (CentOS 6 + EPEL6, freshly built) > > I have these errors during installation of build dependencies: > > > Installing : kmod-dahdi-linux-fwload-vpmadt032-2.6.2-1_centos6.2.6.32 > 20/73 > WARNING: > /lib/modules/2.6.32-358.6.2.el6.x86_64/weak-updates/dahdi-linux-fwload-vpmadt032/dahdi_vpmadt032_loader.ko > needs unknown symbol vpmadtreg_unregister > WARNING: > /lib/modules/2.6.32-358.6.2.el6.x86_64/weak-updates/dahdi-linux-fwload-vpmadt032/dahdi_vpmadt032_loader.ko > needs unknown symbol vpmadtreg_register > WARNING: > /lib/modules/2.6.32-358.el6.x86_64/weak-updates/dahdi-linux-fwload-vpmadt032/dahdi_vpmadt032_loader.ko > needs unknown symbol vpmadtreg_unregister > WARNING: > /lib/modules/2.6.32-358.el6.x86_64/weak-updates/dahdi-linux-fwload-vpmadt032/dahdi_vpmadt032_loader.ko > needs unknown symbol vpmadtreg_register > > > > and then rpmbuild fails with: > > checking for gcc... no > checking for cc... no > configure: error: in `/root/rpmbuild/BUILD/asterisk-11.4.0': > configure: error: no acceptable C compiler found in $PATH > See `config.log' for more details > error: Bad exit status from /var/tmp/rpm-tmp.isB97h (%build) > > > RPM build errors: > Bad exit status from /var/tmp/rpm-tmp.isB97h (%build) > > > > so I think to be added to the build dependencies in the spec file. > > > Then there is a more cryptic failure: > > checking how to run the C++ preprocessor... /lib/cpp > configure: error: in `/root/rpmbuild/BUILD/asterisk-11.4.0': > configure: error: C++ preprocessor "/lib/cpp" fails sanity check > See `config.log' for more details > error: Bad exit status from /var/tmp/rpm-tmp.q7wr5n (%build) > > > > config.log reveals that g++ is missing. The build dependency is gcc-c++ > - I install that and it fails due to missing make > > Later, there is another failure due to missing subversion. > > Altogether, these are the missing lines for the spec file: > > BuildRequires: gcc > BuildRequires: gcc-c++ > BuildRequires: make > BuildRequires: subversion > > > although I would recommend not having a build dependency on SVN or > network access, some people like to build on secured machines without > network access. > > > Eventually, I end up with the same failure I had before: > > > RPM build errors: > File not found: > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64/usr/lib64/asterisk/modules/cdr_adaptive_odbc.so > File not found: > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64/usr/lib64/asterisk/modules/cdr_odbc.so > File not found: > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64/usr/lib64/asterisk/modules/cel_odbc.so > File not found: > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64/usr/lib64/asterisk/modules/func_odbc.so > File not found: > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64/usr/lib64/asterisk/modules/res_config_odbc.so > File not found: > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64/usr/lib64/asterisk/modules/res_odbc.so > > > > Now I've tried: > > > rpmbuild --rebuild \ > --without tds \ > --without misdn \ > --without odbc \ > asterisk-11.4.0-1_centos6.src.rpm > > and on the rebuild, I get > > gzip: ./usr/share/man/man8/autosupport.8 already exists; do you wish to > overwrite (y or n)? > gzip: ./usr/share/man/man8/astgenkey.8 already exists; do you wish to > overwrite (y or n)? > > which suggests that `make clean' didn't really clean up after the last > attempt > > Finally, I get: > > Checking for unpackaged file(s): /usr/lib/rpm/check-files > /root/rpmbuild/BUILDROOT/asterisk-11.4.0-1_centos6.x86_64 > error: Installed (but unpackaged) file(s) found: > /usr/lib64/asterisk/modules/func_speex.so > /usr/lib64/asterisk/modules/res_srtp.so > > > RPM build errors: > Installed (but unpackaged) file(s) found: > /usr/lib64/asterisk/modules/func_speex.so > /usr/lib64/asterisk/modules/res_srtp.so > > > so I added those two items to the spec file and finally I have a build. > > I attach a diff for fixing the spec file, it fixes all these issues > except the `make clean'
Now I tried to repeat the build on the original CentOS6 box using the spec file that I patched on the fresh VM The build failed again on the original box, complaining about unpackaged files I removed the following -devel packages from the box: rpm -e mISDN-devel radiusclient-ng-devel openldap-devel spandsp-devel freetds-devel and then I was able to run the build successfully. So it appears that the build is sensitive to the presence of additional devel packages that are not build requirements in the spec. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
