On Fri, Jun 28, 2013 at 3:59 AM, Jens Bürger <[email protected]> wrote:
> Hello everyone, > > My setup: > Debian squeeze > Asterisk 1.8, DAHDI, libpri, compiled from source > TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 > > I'm trying to get MWI for Voicemail working. In the same server I have > also got an Eicon DIVA PRI card for testing purposes (it is integrated via > CAPI and the chan-capi channel driver into my Asterisk). MWI works just > fine there. > > I read through chan_dahdi.conf and have some questions: > > 1. The documentation of > mwi_mailboxes > says: "You can give a comma separated list of up to 8 mailboxes per span." > > Is this constraint really existing? How am I supposed to use the MWI > feature in even a semi-professional environment? My PBX is used in a > non-commercial project, but I have connected about 50 phones to my PBX, > though, and it is interconnected with two further PBXs which would also > need voicemail with MWI... > This option is intended for BRI spans communicating to a group of ISDN phones connected to that span and the Asterisk server is handling voicemail itself. > 2. How can I set the MWI origin number? > > 3. Are there any debug possibilities for MWI? > Other than the limited support for sending MWI messages to ISDN phones on BRI lines there is no other ISDN MWI support. Richard
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
