Made changes: 1) musiconhold= default channel => 1
2) reboot modprobe wcfxo = ok ztcfg -v result = 1 channel configured Try to dial, still the same problem. (error) Wim ----- Original Message ----- From: "Brent Franks" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, February 23, 2004 9:19 PM Subject: RE: [Asterisk-Users] Unable to create channem of type 'Zap' > Make sure you run a ztcfg after you do a modprobe. > > ztcfg will configure (or bring up) the zap channels on zaptel interface > cards. Do this before starting * and after the modprobe. > > (You may also do a ztcfg -v to see whats configured) > > - Brent > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Wim Venneman > Sent: Monday, February 23, 2004 3:10 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Unable to create channem of type 'Zap' > > Can anyone help me, (after a two day search, also on the mailing list) > I have the following situation: > Asterisk works fine, until I added a FXO card. (Digium) > When I tried to call to the pstn I have the following error > Executing Dial("SIP/Phone2-fc49", "Zap/1/2355") in new stack > NOTIVE[16401]: FILE APP_DIAL.C, LINE 516 (DIAL_EXEC): UNABLE TO CREATE > CHANNEL OF TYPE 'ZAP' > == Everyone is busy at this time > When I start Asterisk I have no error > Only the following isn't right: > ZAP SHOW CHANNELS = No channels > modprobe wcfxo = ok (no errors) > I have following config. > ZAPATA > [channels] > language=en > context=incoming > signalling=fxs_ks > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > pickupgroup=1 > immediate=yes > musiconhold=default channel => 1 > ZAPTEL > loadzone = us > defaultzone = us > fxsks = 1 > EXTENSION > [incoming] > exten => s,1,Dial(SIP/Phone1&SIP/Phone3,20,tr) > [outgoing] > exten => _0X.,1,Dial,Zap/1/${EXTEN:1} > IN [SIP] > include => outgoing > I'm don't know what I can change to the config. > Anyone an idea > Thanks, > Wim > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
