hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes [email protected] settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833
with this config, gateway is registered in cisco gatekeeper correctly. but when i want to call from it, cisco reject my gateway and h225 asn1 messages say "incomplete address". i searched a lot and understand that, if a cisco router acts as gateway, it sends h323-id as well as dialed number for gatekeeper but my gateway(which is asterisk), only send dialed number. therefore cisco gatekeeper doesn't know how route this call and reject it. if i define e164 number in ooh323.conf file, every thing is ok and call routed correctly. my question is: can asterisk work with cisco gatekeeper just by h323-id? if yes, how i can do this? in the other words, is it necessary to define e164 number in ooh323.conf file to have a correct connection or not? thanks in advance SAM
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
