On Mon, Jul 8, 2013 at 12:14 PM, Justin Killen < [email protected]> wrote:
> I have an installation that has analog phones connected via T1 channel > banks. I’m getting complaints from users that they will enter a partial > number (eg 91213), then turn away to get the next few digits, and the > system will start dialing before they have a chance to put in the rest of > the dialing string. Is there a way to increase this delay? The only use > these 4 dialing patterns:**** > > ** ** > > Internal 3 digit numbers**** > > 91 XXX XXX XXXX (for backwards compatibility)**** > > 9 XXX XXXX (also for compatibility)**** > > XXX XXXX > The simple switch in chan_dahdi has two hardcoded timeout times for more digits. 1) If the digits already dialed match an extension in the dialplan but could match another extension if more digits are dialed then chan_dahdi will wait 3 seconds for more digits to arrive. 2) If the digits already dialed do not match any extension in the dialplan but more digits could match an extension then chan_dahdi will wait 8 seconds for more digits. The shorter timeout is so the caller won't have to wait too long if the caller intends to call the shorter dialplan extension. You need to look at the extension patterns in your dialplan to see where you have ambiguity between extensions. Are you using the '.' wildcard? Richard
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
