* THIS IS NOT WHERE YOUR RESPONSE GOES *
On Friday 26 July 2013, Salaheddine Elharit wrote:
> in the CLI i have :
>
>
> 1) for CONGESTION i get the status is 'CONGESTION'
>
>
>
> Accepting call from '0666666666' to '534' on channel 0/12, span 1
> -- Executing [534@default:1] Dial("Zap/12-1", "SIP/228| 10") in new
> stack
> -- Called 228
> -- SIP/228-08361358 is ringing
> -- Got SIP response 480 "Temporarily Unavailable" back from
> 192.168.5.131
> -- SIP/228-08361358 is circuit-busy
> == Everyone is busy/congested at this time (1:0/1/0)
> == Auto fallthrough, channel 'Zap/12-1' status is 'CONGESTION'
>
>
> 2) for no answer i get status is 'NOANSWER'
>
>
> Accepting call from '0666666666' to '534' on channel 0/4, span 1
> -- Executing [534@default:1] Dial("Zap/4-1", "SIP/228| 10") in new
> stack -- Called 228
> -- SIP/228-08362880 is ringing
> -- Nobody picked up in 10000 ms
> == Auto fallthrough, channel 'Zap/4-1' status is 'NOANSWER'
>
>
> 3) for answered i don't get the status is 'answered'
>
>
> Accepting call from '0666666666' to '534' on channel 0/15, span 1
> -- Executing [534@default:1] Dial("Zap/15-1", "SIP/228| 10") in new
> stack
> -- Called 228
> -- SIP/228-08363bb8 is ringing
> -- SIP/228-08363bb8 answered Zap/15-1
>
> when i have the result is 'CONGESTION' or 'NOANSWER'i can go to the next
> (home,s,1)
>
> exten => 534,1,Dial(SIP/228, 10)
> exten => 534,n,NoOp(Dial status is ${DIALSTATUS})
> exten => 534,n,GotoIf($["${DIALSTATUS}" = "CONGESTION"])
> exten => 534,n,Goto(home,s,1)
>
>
> how to do in order to go to the next if the result is answered
>
> exten => 534,1,Dial(SIP/228, 10)
> exten => 534,n,NoOp(Dial status is ${DIALSTATUS})
> exten => 534,n,GotoIf($["${DIALSTATUS}" = "ANSWER"]?answered)
> exten => 534,n,Goto(home,s,1)
You're nearly there; you need to have a label "answered" in your dialplan.
This is done by inserting the name, in round brackets, after the priority and
before the following comma. After a Goto() would be an excellent place to put
it. Try this:
exten => 534,1,Dial(SIP/228, 10)
exten => 534,n,NoOp(Dial status is ${DIALSTATUS})
exten => 534,n,GotoIf($["${DIALSTATUS}" = "ANSWER"]?answered)
exten => 534,n,Goto(home,s,1)
exten => 534,n(answered),NoOp(Call was answered)
...
Note that if you answer the phone, as far as Asterisk is concerned, the Dial()
statement is still being executed; so it won't fall through to the next
priority until the phone is hung up.
--
AJS
Answers come *after* questions.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
