On Tue, Aug 6, 2013 at 10:47 AM, Mike Diehl <[email protected]> wrote:
> I appreciate your quick response. I issued the commands specified and > got NO output! > > =============================================== > CLI> core set verbose 10 > Verbosity was 25 and is now 10 > CLI> core set debug 10 > Core debug was 25 and is now 10 > CLI> module unload chan_sip.so > CLI> module load chan_sip.so > CLI> > =============================================== > > The reason we had to reboot the machine is that we changed it's > physical location, but didn't change it's IP address. As part of the > restart, I also took the opportunity to rebuild a RAID-1 array. Other > than that, there have been no configuration changes since the last > time this worked. > > Any other ideas? > > Are the phone still working? I've noticed that realtime registered peers don't always show when I do "sip show peers" or even "sip show peer *name*". I usually only see the peer if I make a call to the peer or the peer makes a call first. Do you have rtcachefriends=yes in your sip.conf? -- Thanks, Warren Selby, dCAP http://www.SelbyTech.com <http://www.selbytech.com>
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
