My friend, You are in a wrong list, this an asterisk list, you should to be in freeswitch list
Kind Regards On Thu, Aug 8, 2013 at 10:39 AM, Rajat toshniwal < [email protected]> wrote: > ** > > Hi > > I am trying to deploy freeswitch with Digium TE121 card for my office > setup, but it is continuously showing Signaling is up and channels are > down except D channel. > Our Architecture is like > We have freeswitch installed with libpri1.4 and Dahdi. > I am from India and here we are having E1 trunk. > > Dahdi Configuration is > > cat system.conf > # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7 19:39:07 2013 > # If you edit this file and execute /usr/sbin/dahdi_genconf again, > # your manual changes will be LOST. > # Dahdi Configuration File > # > # This file is parsed by the Dahdi Configurator, dahdi_cfg > # > # Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) > span=1,1,0,ccs,hdb3,crc4 > # termtype: te > bchan=1-15,17-31 > dchan=16 > echocanceller=mg2,1-15,17-31 > > # Global data > > loadzone = uk > defaultzone = uk > > > > cat modules > # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) > on Wed Aug 7 19:37:48 2013 > # If you edit this file and execute /usr/sbin/dahdi_genconf again, > # your manual changes will be LOST. > wcte12xp > # Xorcom Astribank Devices > xpp_usb > > > dahdi_hardware > pci:0000:02:08.0 wcte12xp+ d161:8000 Wildcard TE121 > > dahdi_scan > [1] > active=yes > alarms=OK > description=Wildcard TE121 Card 0 > name=WCT1/0 > manufacturer=Digium > devicetype=Wildcard TE121 (VPMOCT032) > location=PCI Bus 02 Slot 09 > basechan=1 > totchans=31 > irq=0 > type=digital-E1 > syncsrc=1 > lbo=0 db (CSU)/0-133 feet (DSX-1) > coding_opts=AMI,HDB3 > framing_opts=CCS,CRC4 > coding=HDB3 > framing=CCS/CRC4 > > > Card is properly installed and recognized by Dahdi > > Freetdm is compiled with libpri and configuration is like > cat /usr/local/freeswitch/conf/freetdm.conf > [general] > cpu_monitor => yes > cpu_monitoring_interval => 2000 ; monitor usage every 2 seconds > cpu_set_alarm_threshold => 90 ; whenever 90% of global CPU usage is > reached, trigger the alarm. > cpu_reset_alarm_threshold => 80 ; when the CPU usage decreases at 80%, > clear the alarm. > cpu_alarm_action => reject,warn ; Start rejecting calls when the CPU > alarm is triggered and also print warnings. > > [span zt myDAHDISpan] > trunk_type => E1 > group => g1 > b-channel => 1-15 > d-channel => 16 > b-channel => 17-31 > > > cat /usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml > <configuration name="freetdm.conf" description="FreeTDM Configuration"> > <settings> > <param name="debug" value="1"/> > </settings> > <libpri_spans> > <span name="myDAHDISpan"> > <!-- Log Levels: none, alert, crit, err, warning, notice, info, debug --> > <param name="switch" value="euroisdn"/> > <param name="node" value="cpe"/> > <param name="dialect" value="q931"/> > <param name="debug" value="all"/> > <param name="dialplan" value="XML"/> > <param name="context" value="public"/> > <param name="l1" value="alaw"/> > </span> > </libpri_spans> > </configuration> > > > Freeswitch logs are showing > > 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c10][1:10] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c11][1:11] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c12][1:12] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c13][1:13] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c17][1:17] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c18][1:18] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c19][1:19] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c20][1:20] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c21][1:21] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c22][1:22] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c23][1:23] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c24][1:24] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c25][1:25] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c26][1:26] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c27][1:27] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c28][1:28] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c29][1:29] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c30][1:30] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c31][1:31] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:23.673847 [WARNING] ftdm_io.c:3022 [s1c5][1:5] Channel > not opened, proceeding anyway > 2013-08-08 15:38:48.613848 [WARNING] ftmod_libpri.c:1975 [s1c6][1:6] -- > T316 timed out, resending RESTART request > 2013-08-08 15:38:48.613848 [WARNING] ftmod_libpri.c:1975 [s1c7][1:7] -- > T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c8][1:8] -- > T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c9][1:9] -- > T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c10][1:10] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c11][1:11] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c12][1:12] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c13][1:13] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15] > -- T316 timed out, resending RESTART request > 2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c17][1:17] > -- T316 timed out, resending RESTART request > > > > Libpri logs are showing > > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > DL-DATA request > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Protocol Discriminator: Q.931 (8) len=13 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Message Type: RESTART (70) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Transmitting N(S)=4, window is open V(A)=2 K=7 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI: 0 State 7(Multi-frame established) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > V(A)=2, V(S)=4, V(R)=6 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > T200_id=8192, N200=3, T203_id=0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ > 00 01 08 0c 08 02 00 00 46 18 03 a9 83 8d 79 01 80 ] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Informational frame: > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > SAPI: 00 C/R: 0 EA: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI: 000 EA: 1 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > N(S): 004 0: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > N(R): 006 P: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 13 > bytes of data > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Protocol Discriminator: Q.931 (8) len=13 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Message Type: RESTART (70) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > [18 03 a9 83 8d] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 > Exclusive Dchan: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > ChanSel: As indicated in following octets > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Ext: 1 Channel: 13 Type: CPE] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > [79 01 80] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Restart Indicator (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated > Channel (0) ] > 2013-08-08 15:41:18.633844 [DEBUG] lpwrap_pri.c:199 [s1c16][1:16] -- > Starting timer 0x2678478 with timeout 30000 ms > 2013-08-08 15:41:18.633844 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14] > -- T316 timed out, resending RESTART request > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > DL-DATA request > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Protocol Discriminator: Q.931 (8) len=13 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Message Type: RESTART (70) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Transmitting N(S)=5, window is open V(A)=2 K=7 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI: 0 State 7(Multi-frame established) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > V(A)=2, V(S)=5, V(R)=6 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > T200_id=8192, N200=3, T203_id=0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ > 00 01 0a 0c 08 02 00 00 46 18 03 a9 83 8e 79 01 80 ] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Informational frame: > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > SAPI: 00 C/R: 0 EA: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI: 000 EA: 1 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > N(S): 005 0: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > N(R): 006 P: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 13 > bytes of data > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Protocol Discriminator: Q.931 (8) len=13 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Message Type: RESTART (70) > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > [18 03 a9 83 8e] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 > Exclusive Dchan: 0 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > ChanSel: As indicated in following octets > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Ext: 1 Channel: 14 Type: CPE] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > [79 01 80] > 2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > > Restart Indicator (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated > Channel (0) ] > 2013-08-08 15:41:18.633844 [DEBUG] lpwrap_pri.c:199 [s1c16][1:16] -- > Starting timer 0x26784d8 with timeout 30000 ms > 2013-08-08 15:41:18.633844 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15] > -- T316 timed out, resending RESTART request > > > ftdm dump 1 n (where n is from 1 to 15 and 17 to 31) is showing state > as down > > freeswitch@dst1> ftdm dump 1 1 > > span_id: 1 > chan_id: n > physical_span_id: 1 > physical_chan_id: n > physical_status: ok > physical_status_red: 0 > physical_status_yellow: 0 > physical_status_rai: 0 > physical_status_blue: 0 > physical_status_ais: 0 > physical_status_general: 0 > signaling_status: UP > type: B > state: DOWN > last_state: RESTART > txgain: 0.00 > rxgain: 0.00 > cid_date: > cid_name: > cid_num: > ani: > aniII: > dnis: > rdnis: > cause: NONE > session: (none) > > I have tried many configurations, but I am not able to fix that issue , > If I put my Pri line into panasonic PBX, it is working properly. > > Kindly help me in solving this issue. > > > Forget to mention that I have already tested below mentioned > configuration > > > > > > 1. Go to FS source directory and change dir to this > path libs/freetdm/src/ftmod/ftmod_libpri > 2. change #define T316_TIMEOUT_MS_DEFAULT to 10000 > 3. #define T316_TIMEOUT_MS_MAX to 300000 > 4. #define T316_ATTEMPT_LIMIT_DEFAULT to 30 (max. channels in PRI > lines) > > It didn't work > > Also we are using the latest version of Freeswitch 1.2.12 and libpri1.4.14 > > > Regards > Rajat Toshniwal > ---------------------------------------------------------------------------------- > Disclaimer: The information contained in this communication is confidential, > private, proprietary, or otherwise privileged and is intended only for the > use of the addressee. Unauthorized use, disclosure, distribution or copying > is strictly prohibited and may be unlawful. If you have received this > communication in error, please delete this message and notify the sender > immediately - Samin TekMindz India Pvt. Ltd. > ---------------------------------------------------------------------------------- > > _________________________________________________________________________ > Professional FreeSWITCH Consulting > Services:[email protected]http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication > Serverhttp://www.cudatel.com > > Official FreeSWITCH > Siteshttp://www.freeswitch.orghttp://wiki.freeswitch.orghttp://www.cluecon.com > > FreeSWITCH-users mailing > [email protected]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org > > > > ------------------------------ > Disclaimer: The information contained in this communication is > confidential, private, proprietary, or otherwise privileged and is intended > only for the use of the addressee.Unauthorized use, disclosure, > distribution or copying is strictly prohibited and may be unlawful. If you > have received this communication in error, please delete this message and > notify the sender immediately - Samin TekMindz India Pvt.Ltd. > ------------------------------ > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
