El 06/09/13 14:44, Malcolm Davenport escribió:
Howdy,
Please forgive the off-list e-mail. I'm not subscribed to the list, I only
peruse the archives.
The follow up from George is correct. For phones that have already been
attached to DPMA, DPMA disables the enable_check_sync phone setting.
For phones that have not yet been attached to DPMA, that's not the case, as
enable_check_sync is enabled out of the box. So, a properly formatted SIP
NOTIFY will do the trick.
You can do that outside of Asterisk using sipp or sipsak or something similar.
To cover the case for phones that are already attached to DPMA, we'll add a new phone option in DPMA 1.7.1. We're on DPMA 1.6.0 right now, and DPMA 1.7.0 is already in the latter stages of internal QA. I don't want to derail that train as we're very
nearly there.
The new phone option will simply expose the ability to turn enable_check_sync
on or off for phones. We'll still default to the current behavior of disabling
it though for phones attached to DPMA.
Apologies for the inconvenience.
The check-sync notify does not work in all required scenarios. I tracked the
traffic with wireshark. To demonstrate:
Start from a D40 phone, factory resetted. The asterisk server starts with DPMA
loaded but with a zero-bytes conf.
Write a valid configuration that includes the phone.
On Asterisk: module reload res_digium_phone.so ; digium_phones reconfigure all
; sip notify CHECKSYNC $PHONE_IP
(this makes the phone re-query the network in this one time)
(phone gets reconfigured and registers the SIP accounts)
Now, remove the phone section, but keep all other sections intact.
On Asterisk: module reload res_digium_phone.so ; digium_phones reconfigure all
; sip notify CHECKSYNC $PHONE_IP
(phone had a DPMA session, so it reloads configuration)
(phone tries to fetch configuration, but fails, as expected. The phone gets stuck in the
"Communication Error" screen)
Now, restore the phone section so the configuration returns to the previously
working state.
On Asterisk: module reload res_digium_phone.so ; digium_phones reconfigure all
; sip notify CHECKSYNC $PHONE_IP
(sip notify gets sent, phone answers with 200 Ok)
(nothing happens. The phone is still stuck at the "Communication Error" screen)
What should happen is that the phone should re-scan at the last step and reload
the configuration, as it did the first time.
The CHECKSYNC mentioned above is any entry in sip_notify.conf that references check-sync.
As mentioned in the mailing list, I already know the phone IP for the "sip
notify" command.
What I think is happening is that if the phone sees a DPMA server but the server has no valid configuration for the phone, the phone gets stuck in a state where check-resync will not make the phone rescan an updated configuration, and needs to be reset
manually.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
