Kilburn Abrahams wrote:
Hi All
Hola,
I am testing Asterisk 12 and got most things working, but cannot get a
trunk setup working. I am using the new pjsip channel driver. The
provider provides IP security so no registering or credentials are
required.
<snip>
My version12
[udpnonat]
type=transport
protocol=udp
bind=0.0.0.0:5060
[maintrunk]
type=endpoint
transport=udpnonat
disallow=all
allow=g729,alaw,ulaw
aors=maintrunk
[maintrunk]
type=aor
contact=sip:1.2.3.4:5060
and use Dial(PJSIP/${ARG1}@maintrunk)
It dials but does not connect to the provider. Is the config correct?
Your config itself looks fine, what actually shows up on the console?
Cheers,
--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
