Hello Russ, Actually this was with pattest and patgen, not patlooptest. I don't know if I can use patlooptest with B410P, should I?
Thanks. On Wed, Jan 29, 2014 at 6:33 PM, Russ Meyerriecks <rmeyerrie...@digium.com>wrote: > On Tue, Jan 28, 2014 at 11:56 AM, Rodrigo Borges Pereira > <rodrigoborgespere...@gmail.com> wrote: > > > (.Error 44119): Unexpected result, 255 != 0, 1 bytes since last error. > > > Would this be the kind of output that matches a problem card or something > > may be wrong in my setup? I'm using DAHDI 2.8.0.1. > > patlooptest works by sending an incremental sequence of bytes down the > transmit side (1,2,3,4,...). Then on the receive side, it watches for > the same sequence. > > In this case, you aren't receiving any valid patterns. > It's likely a configuration error (unless the card is known bad). You > might try double checking your test procedure. > > -- > Russ Meyerriecks > Digium, Inc. | Linux Kernel Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > direct: +1 256-428-6025 > Check us out at: www.digium.com & www.asterisk.org > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users