Hi, http://wiki.sangoma.com/wanpipe-wireshark-pcap-pri-bri-wan-t1-e1-tracing
On 18 February 2014 21:34, Eric Wieling <[email protected]> wrote: > I was not aware Wireshark worked on PRI spans. What interface should I > tell it to watch? 8-| > > Card is: wanpipe: AFT-A101-SH PCI T1/E1 card found (HDLC (DS) rev.37), > cpu(s) 1 > > chan_dahdi.conf has a timestamp of Jun 25 of last year > > # cat /etc/asterisk/chan_dahdi.conf > ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit > ;autogenrated on 2012-05-29 > ;Dahdi Channels Configurations > ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak > > [trunkgroups] > > [channels] > usecallerid=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > immediate=no > pridialplan=unknown > resetinterval=never > > ;Sangoma A101 port 1 [slot:2 bus:17 span:1] <wanpipe1> > switchtype=national > context=pbxmax > group=1 > echocancel=yes > signalling=pri_cpe > channel =>1-23 > > > PRI debug: > > seidelnj*CLI> pri debug span 1 > Enabled debugging on span 1 > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > TEI=0 Got SABME from network peer. > TEI=0 Sending UA > TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established) > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of jg > Sent: Tuesday, February 18, 2014 3:12 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] PRI Error on span 1: Received MDL/TEI > management message, but configured for mode other than PTMP > > MDL/TEI is pretty low level. > > Which card are you using? > > chan_dahdi.conf? > > Card config? > > PCAP trace? Q.931 and Q.921 messages are relatively easy to debug with > wireshark. > > jg > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New > to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Pozdrawiam, Łukasz Grzywański Senior Voice Engineer Fast White Cat S.A. ul. Św.Mikołaja 8-11, 50-125 Wrocław, Polska tel. +48 717226000, fax +48 717226099 mob. +48 517255333, e-mail: [email protected]
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
