OK set PROC to -
OPTIMIZE+=-march=arm
and now getting tons of errors in k6opt.s
src/k6opt.s:350: Error: bad instruction `psllw %mm3,%mm0'
src/k6opt.s:351: Error: bad instruction `movd %mm0,%eax'
src/k6opt.s:352: Error: selected processor does not support ARM mode `movw
%ax,(%esi)'
src/k6opt.s:356: Error: bad instruction `emms'
src/k6opt.s:358: Error: bad instruction `popl %esi'
src/k6opt.s:359: Error: bad instruction `leave'
src/k6opt.s:360: Error: bad instruction `ret'
src/k6opt.s:367: Error: unrecognized symbol type ""
src/k6opt.s:372: Error: unrecognized symbol type ""
src/k6opt.s:382: Error: unrecognized symbol type ""
src/k6opt.s:384: Error: bad instruction `pushl %ebp'
src/k6opt.s:385: Error: bad instruction `movl %esp,%ebp'
src/k6opt.s:386: Error: bad instruction `pushl %esi'
Doug Crompton
WA3DSP
http://www.crompton.com
On Monday, March 3, 2014 3:18 PM, Rodrigo Borges Pereira
<[email protected]> wrote:
Try to set PROC to arm.
>
>
>
>On Mon, Mar 3, 2014 at 7:13 PM, Doug <[email protected]> wrote:
>
>I was successful in compiling asterisk in raspbien except for the following
>error If I enable the gsm codec. It appears there is something in the Makefile
>n this directory that needs to be changed. Probably involving optimization.
>Not sure why it does not recognize the processor since it is one that is
>mentioned in the Makefile. Any help would be appreciated.
>>
>>
>>
>>make[2]: Entering directory `/usr/src/asterisk/codecs/gsm'
>> [AS] src/k6opt.s -> src/k6opt.o
>>Assembler messages:
>>Error: unknown architecture `armv6l'
>>
>>Error: unrecognized option -march=armv6l
>>make[2]: *** [src/k6opt.o] Error 1
>>
>>
>>Here are the lines in the Makefile -
>>
>>ifeq (, $(findstring $(OSARCH) , Darwin SunOS ))
>>ifeq (, $(findstring $(PROC) , x86_64 amd64 ultrasparc sparc64 arm armv5b
>>arm5b armeb hppa2.0 ppc powerpc ppc64 ia64 s390 bfin mipsel
>>mips))
>>ifeq (, $(findstring $(shell uname -m) , ppc ppc64 alpha armv4l arm5b armv5b
>>armv61 armv7l s390 ))
>>OPTIMIZE+=-march=$(PROC)
>>endif
>>endif
>>endif
>>
>>gcc is -
>>
>>Thread model: posix
>>gcc version 4.6.3 (Debian 4.6.3-14+rpi1)
>>
>># uname -m
>>armv6l
>>
>>
>>Doug
>>
>>--
>>_____________________________________________________________________
>>-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>>asterisk-users mailing list
>>To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
