Well, I went to an online xml validation site and found an error. After correcting the error, my problem is gone!
Thank you. Mike. On Thu, Mar 27, 2014 at 2:56 PM, Noah Engelberth <[email protected]>wrote: > To me, the settings you've sent look correct. However, one thing I've > found with SPA configuration files is that they're very picky - if they > don't parse as valid XML anywhere in the file, it will pretty much silently > discard the entire file. The first troubleshooting step I use for SPA > provisioning is to run all the configuration files a phone should be > pulling through an XML validator, or pull them up in a browser and see if > the browser handles it as XML (Chrome or IE seem to work equally well for > this in my experience, but Firefox can get a bit cranky since the file > isn't really an XML file with all the normal headers & tags). > > > > Also, have you verified with logging on the provisioning server that the > configuration file is actually being pulled? > > > > > > Thank you, > > > > Noah Engelberth > > MetaLINK Technologies > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Mike Diehl > *Sent:* Thursday, March 27, 2014 2:47 PM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* [asterisk-users] SPA112 provisioning file questions > > > > Hi all, > > I've got a provisioning file that I use to configure Cisco SPA112's. > > I'm wanting to get this file to do 3 things for me. I want to turn T.38 > on, Call forwarding off, and Call waiting, off for both lines. but it's > not working. > > This is what I'm using to enable T.38 for line 1. > > <FAX_Enable_T38_1_>Yes</FAX_Enable_T38_1_> > <FAX_T38_Redundancy_1_>1</FAX_T38_Redundancy_1_> > <FAX_T38_ECM_Enable_1_>Yes</FAX_T38_ECM_Enable_1_> > <FAX_Tone_Detect_Mode_1_>caller or callee</FAX_Tone_Detect_Mode_1_> > > This is what I'm using to turn cfwd off on line 1. > > <Cfwd_All_Serv_1_>No</Cfwd_All_Serv_1_> > <Cfwd_Busy_Serv_1_>No</Cfwd_Busy_Serv_1_> > <Cfwd_No_Ans_Serv_1_>No</Cfwd_No_Ans_Serv_1_> > <Cfwd_Sel_Serv_1_>Yes</Cfwd_Sel_Serv_1_> > <Cfwd_Last_Serv_1_>Yes</Cfwd_Last_Serv_1_> > > This is what I'm using to turn call waiting off on line 1. > > <Call_Waiting_Serv_1_>No</Call_Waiting_Serv_1_> > > However, these setting don't seem be be getting set on the device, even > after a reboot. > > Any ideas what I'm doing wrong? > > TIA, > > Mike. > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
