On 04/16/2014 05:42 PM, Josh Metzger wrote:
Try starting Asterisk with the -f option. It will NOT fork into the
background so you will see all messages on startup (including any that
might not end up in the log file). Search for DAHDI errors which will
likely be there.
Also, if you configure everything and start DAHDI but don't start
Asterisk and run "dahdi_tool", is it showing you the circuits in an "OK"
state?
Josh
On Wed, Apr 16, 2014 at 5:25 PM, <[email protected]
<mailto:[email protected]>> wrote:
Hi all,
I have a fresh install of Asterisk 11.8.1 and am putting a Digium
TE435 4 T1 card in it for ISDN PRI. I can get the card to be
recognised by the DAHDI utilities but when I put in the file
"chan_dahdi.conf" with either the generated file from samples with
what seem to be appropriate settings or with the basic config as
outlined on the DAHDI install guide the Asterisk "core show help"
display is missing all the "dahdi" and "pri" commands.
If I remove the "chan_dahdi.conf" file and restart Asterisk the
commands magically reappear. I have gone back and checked on
menuselect but don't see anything obvious that I have missed to
support this function.
I have run out of ideas on how to integrate this. The documentation
makes it sound pretty simple but I have been fighting this for a
week now with no success.__ __
I am not seeing any parse errors from the module reload command:
asteriskpbx*CLI> module reload chan_dahdi.so <http://chan_dahdi.so>
asteriskpbx*CLI>
The truncated output from "core show help" is:
core stop when convenient Shut down Asterisk at empty call volume
core waitfullybooted Wait for Asterisk to be fully booted
data get Data API get
data show providers Show data providers
... ....
resencestate change Change a custom presence state
presencestate list List currently know custom presence states
realtime destroy Delete a row from a RealTime database
realtime load Used to print out RealTime variables.
I can restart the asteriskpbx process without the "chan_dahdi.conf"
file and all the dahdi and pri commands are present. The
"chan_dahdi.conf" file I am loading is a basic file from the DAHDI
instructions. Even the sample file will not correctly load up either.
asteriskpbx@asteriskpbx:/etc/asterisk$ cat chan_dahdi.conf
[trunkgroups]
[channels]
usecallerid = yes
hidecallerid = no
callwaiting = yes
usecallingpres = yes
callwaitingcallerid = yes
threewaycalling = yes
transfer = yes
canpark = yes
cancallforward = yes
callreturn = yes
echocancel = yes
echocancelwhenbridged = yes
relaxdtmf = yes
rxgain = 0.0
txgain = 0.0
group = 1
callgroup = 1
pickupgroup = 1
immediate = no
switchtype = 5ess
signalling = pri_cpe
context = incoming
echocancel = yes
channel = 1-23
____
Any suggestions on what I am missing would be greatly appreciated.
Steve VanWambeck____
Do you have the kernel module loaded?
lsmod | grep dahdi
sean
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
