On Fri, May 30, 2014 at 4:07 AM, Lee, John (Sydney) <john....@compuware.com> wrote: > Even without plugging in the ISDN into span 1, all 4 spans are flashing red.
Blinking red led is normal for spans which have been configured, but are receiving no signal. I might try plugging up a physical loopback plug to the port to rule out a bad incoming signal. > wct4xxp 0000:04:08.0: TE4XXP: Span 1 configured for CCS/HDB3/CRC4 > wct4xxp 0000:04:08.0: Span 2 configured for ESF/B8ZS > wct4xxp 0000:04:08.0: All spans in alarm : No validspan to source RCLK from This looks like a normal startup for mixed-mode configuration with nothing connected to the ports. I might try setting all spans to T1 or all spans to E1 and plugging one or the other back up to test the connections. -- Russ Meyerriecks Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA direct: +1 256-428-6025 Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
