I know, I should reply to myself, but I just realized this... Andrew Thompson wrote: > Abraham Lincoln wrote: >> Hi, >> >> good day i just install successfully asterisk and when i try iax >> client to connect to my asterisk server im getting a "Call reject by >> Remote" >> >> this is the content of my iax.conf: >> >> register => test:[EMAIL PROTECTED] >> >> [test] >> type=friend >> secret=mypass >> deny=0.0.0.0/0.0.0.0 >> permit=10.1.1.2/255.255.255.0 >> host=10.1.1.2 >> >> >> anyone? encountered this problem and how to fix it... im using >> iaxclient >> > > Normally the subnet mask representing a single IP is 255.255.255.255, > but I've not tried this in *, it could be different. > > Add a username section with the same name as your definition. See my > setup, below: > > [712] > type=friend > context=testlocal > username=712 > secret=apassword > host=dynamic > callerid=712 > mailbox=712 > notransfer=yes >
I believe I read here a few days ago that the host and username definitions are like either/or. Either you use a username, or you use a host address. This is a statement I would like someone to tell me if I am correct on: If you are using a host= line, then a permit/deny is redundant(and possibly just plain wrong?) ----- Andrew Thompson http://aktzero.com/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users