Hello
I have a simple 1 channel goip gateway
(http://www.voip-info.org/wiki/view/GoIP).
The incoming and outgoing calls work with Asterisk except the caller ID for the
outgoing calls. I think I have exhausted all possible options regarding setting
a caller ID and it still doesn't work. The recipients will get "private
number". The incomings caller ids are work just fine.
exten => _XXXXXXX.,1,Set(DIAL_NUMBER=...)
exten => _XXXXXXX.,2,Set(CALLERID(num)=...)
exten => _XXXXXXX.,3,Set(CALLERID(name)=...)
exten => _XXXXXXX.,4,Set(CALLERID(all)= “...” <...>)
exten => _XXXXXXX.,n,Dial(SIP/${EXTEN}@gsm1)
Also there is 1 setting in the Goip device itself to set "SIM Number" which
supposed to be the phone number
(http://www.geekzone.co.nz/imagessubs/581abf9ffb19bc54aedcf2e6a898643b.jpg), I
tried to set that as well it doesn't help. I also tried with and without +
country prefixes, none works :(
I tried with Gsm caller ID anonymous enabled and disabled. I saved the config
and rebooted the device after any changes just to make it 100% sure it's
applied.
Any suggestions are welcome. If anyone have full configs for this hw
(outbound/inbound calls + smses) more than welcome to post it. I followed this
tutorial:
https://github.com/tangaza/Tangaza/wiki/Connecting-a-GoIP-GSM-VoIP-gateway-to-an-Asterisk-AGI
Thanks!
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
