>From a New Mexico perspective, When you order a PRI from a CLEC they typically will dump your CLID info and replace it with the "main" number on the span. You can request that they not do this and that they pass the CLID thru.
We have been working with some of the local PSAP's here, CLEC's and the ILEC. In about 2 weeks we are going to do some live 911 trials using asterisk. The goal is for us to set the CallerID to a test number, then dial 911 and see which PSAP the call goes to, and if the CLID shows up. If it does, then some issues are resolved for us. There is also a special circuit you can purchase from the ILEC that is basicly a 911 T1 interface into the selective router the ILEC maintains here. Its a little pricey, but still worth it. So we could also switch calls inside Asterisk to the 911 truck directly. In either case, the County PSAP and the state 911 director have been very very helpful and most willing to be involved. NENA has also been very helpfull as has Intrado (once you sign NDA documents). My recommendation is that if you are looking at 911 issues, go buy your local PSAP manager a cup of coffee and listen to how things work in your area. The country doesnt work the same in all areas. Help educate them on how this VoIP stuff works, most are dealing with two full plates and trying to get Cell 911 stuff up to Phase 1, or in some cases Phase 2 standards. john brown chagres technologies, inc (americas) chagres technologies, B.V. (emea) On Thu, Feb 26, 2004 at 04:31:41PM -0500, John Fraizer wrote: > Steve Dolloff wrote: > > I have the following in my sip.conf entries: > > > > callerid="Anonymous" <8885551212> > > > > This still passes the number for 911, but flags the call as private. I > > believe this will meet your requirements. > > > > Stephen > > OK. I was under the impression that the PSAP got their information based on > ALI/ANI and not from CLID. Are you telling me that they're looking at CLID? > > Also, at least in the testing I've done, the text portion of the CLID string > is ignored by the telco. They only look at the number and generate the text > based on what is in their database. IE; If I tell my asterisk server to set > my callerID to "test" <my home number> and call someplace, What I get on the > CLID display of the phone I dial is "John Fraizer" and my home number. > > Since Powell has stated that we must provide E911 services, I am wondering > what precisely is going to have to be done to do so with Asterisk. Routing > the call to the PSAP when someone dials 911 is the easy part. Sending all > of the information they want/need (much more than just CLID and something > that is regulated) is an alltogether different story. > > John > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
