[Asterisk-Users] RE:Asterisk PABX switch

[Nikolay Koev]

Hi, Nick I believe * can connect PABX through VoIP, but my question is Whether it can switch calls between PABXs directly, within the TE405P, without conversion to IP. And on the other hand, all PABX To be able to make calls to the analogue PBX through VoIP. All E1 lines are distant SDH, and VoIP to cisco is Ethernet distant too.   >Date: Sat, 28 Feb 2004 08:54:43 -0500 >From: Nicholas Bachmann <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: [Asterisk-Users] Asterisk PABX switch >Reply-To: [EMAIL PROTECTED] > >Nikolay Koev wrote: > >> I wonder if the next is possible with *: >> >>  >> >>                PABX >> >>                 | >>                E1 >>                 | >> >> PABX -E1--  Asterisk --E1--  PABX >>                 |   \ >>                E1    \ >>                 |       IP >>               PABX       \ >>                          Cisco 827V  ---- Analogue >> PBX >> >Yes, this is possible to do, assuming your other IP PBX supports on of >the VoIP protocols * does.  You'll also need a TE405P or a TE410P for >the E1 interface. > >> If possible, how much power the CPU must have? >> >Since you'll be doing encoding and decoding on a bunch of channels, >you'll want a farly beefy setup. > >Nick